where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

401 views
Technical Discussions
Christoph Schnitger
Christoph Schnitger
01:28 Oct-23-2001
Spott Video Inspection ( called SVI )

Dear Members of the NDT Community...

i am looking for a system called Spott - Video - Inspection
which is really new on the german NDT Market.

This system is probably more useful to test and detect faults
in Glas fibre reinforced plastic (GFK)
Carbon fibre reinforced plastic (CFK)
Composite materials
Sandwich and honeycomb constructions
Titanium and aluminium coatings


The really short description about the technigue :

Active test method
Exposure of the parts (hull) with certain wave lengths (light)
Registration of all relevant datas
Software processing these datas into image files

Every Information about this NDT Method will be helpful.
Many Thanks in advance !

C.Schnitger ( schnitger@eure.de )





    
 
 
Michel Honlet
Michel Honlet
02:48 Apr-25-2002
Re: Spott Video Inspection ( called SVI )
Dear Mr Schnitger,

we are consultants for the industry regarding NDT exclusively with optical techniques (see www.honlet.com ; page still in a build-up process...)

My question to you:
Have you progressed in getting more information about SVI and what level of information or experience have you now? What did tell you (except the manufacturer, of course) this is a really new technique?
From what I have seen up to now I am not yet convinced that it is really new. Despite being an optimistic and positive person in this case I still feel an attempt to "sell" something existing as something "new", based on such experience in the past regarding optical methods. But I am ready to learn more and to join your opinion if that is still valid. Ultimately, the industrie finds out sooner or later what is going on but appreciates independent support in the selection process in order to avoid waste of time. So do we.

Many thanks in advance for your reply!

Michel Honlet - Managing Director


: Dear Members of the NDT Community...
.
: i am looking for a system called Spott - Video - Inspection
: which is really new on the german NDT Market.
.
: This system is probably more useful to test and detect faults
: in Glas fibre reinforced plastic (GFK)
: Carbon fibre reinforced plastic (CFK)
: Composite materials
: Sandwich and honeycomb constructions
: Titanium and aluminium coatings
.
:
: The really short description about the technigue :
.
: Active test method
: Exposure of the parts (hull) with certain wave lengths (light)
: Registration of all relevant datas
: Software processing these datas into image files
.
: Every Information about this NDT Method will be helpful.
: Many Thanks in advance !
.
: C.Schnitger ( schnitger@eure.de )
.
.



    
 
 

Product Spotlight

MUSE Mobile Ultrasonic Equipment

The MUSE, a portable ultrasonic imaging system, was developed for in-field inspections of light-weig
...
ht structures. The MUSE consists of a motor-driven manipulator, a water circulation system for the acoustic coupling and a portable ultrasonic flaw detector (USPC 3010). The MUSE provides images of internal defects (A-, B-,C- and D-scan).
>

Echomac® PA Rail Wheel Tester

MAC introduces two versions of Rail Wheel Testers using ECHOMAC® PA platform based on customer requ
...
irements.
>

NDTkit RT

NDTkit RT, TESTIA's Digital Radiography software The NDTkit product line software for X-ray analysi
...
s. NDTkit RT is a software benefiting from the Ultis kernel which is dedicated to radiographic image analysis. It offers a set of tools and filtering processes to assist RT operators in finding relevant flaws.
>

Exertus Dual 120

The Exertus Dual 120 Projector has the ability to accept Iridium 192 sources or Selenium 75 source
...
s. This projector incorporates design and safety features that make it flexible, compact and lightweight. The Projector is lighter than most of its competitors. It incorporates an improved source channel, based on a new helicoidal design, which makes maintenance easier. The helicoidal design also allows smoother movement of the source assembly inside the device, making it easier for the operator and improving safety. The Projector also has a unique safety feature not found in competitive products. The source assembly locking mechanism is triggered by the source holder capsule at the front of the source assembly, thereby always assuring the operator that the source has returned to the safe position. The Exertus Dual 120 is ISO3999:2004 compliant.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window