where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Hillger Ing. Büro
was founded in 1984 and develops special ultrasonic imaging systems for high-tech materials.

1059 views
Technical Discussions
Godfrey Hands
Consultant,
PRI Nadcap, United Kingdom, Joined Nov 1998, 295

Godfrey Hands

Consultant,
PRI Nadcap,
United Kingdom,
Joined Nov 1998
295
06:24 Nov-15-2001
Fokker Bond Tester

Hi,
I have a customer who wants to buy a Fokker Bond Tester, either New or Second Hand and fully working.
Also need someone who can repair a Fokker Bond Tester.

Can anybody help please.

Regards,

Godfrey Hands


    
 
 
Mengjun Diao
Mengjun Diao
00:35 Jun-17-2002
Re: Fokker Bond Tester
: Hi,
: I have a customer who wants to buy a Fokker Bond Tester, either New or Second Hand and fully working.
: Also need someone who can repair a Fokker Bond Tester.
.
: Can anybody help please.
.
: Regards,
.
:Mengjun Diao
.



    
 
 
Franc Buijsen
Franc Buijsen
05:49 Jun-17-2002
Re: Fokker Bond Tester
: : Hi,
: : I have a customer who wants to buy a Fokker Bond Tester, either New or Second Hand and fully working.
: : Also need someone who can repair a Fokker Bond Tester.
: .
: : Can anybody help please.
: .
: : Regards,
: .
: :Mengjun Diao
: .
.
Dear sir,

Agent for Fokker Bondtester is:
Servicing europe NDT
PO Box 49
4700 AA Roosendaal
The Netherlands

You can contact: Mr. P. Troost
Tel: +31 252 340386
Fax: +31 252 340387
E-mail: p.troost@sendt.com

Servicing europe ndt takes care of repairs, calibrations and has second hand model 80's and new model 90's available.


Franc Buijsen



    
 
 

Product Spotlight

NDTkit RT

NDTkit RT, TESTIA's Digital Radiography software The NDTkit product line software for X-ray analysi
...
s. NDTkit RT is a software benefiting from the Ultis kernel which is dedicated to radiographic image analysis. It offers a set of tools and filtering processes to assist RT operators in finding relevant flaws.
>

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Lyft™: Pulsed Eddy Current Reinvented

PEC Reinvented—CUI Programs Redefined Corrosion under insulation (CUI) is possibly the greatest u
...
nresolved asset integrity problem in the industry. Current methods for measuring wall thickness with liftoff, without removing insulation, all have severe limitations. Eddyfi introduces Lyft — a reinvented, high-performance pulsed eddy current (PEC) solution. The patent- pending system features a state-of-the-art portable instrument, real- time C-scan imaging, fast data acquisition with grid-mapping and dynamic scanning modes, and flexibility with long cables. It can also scan through thick metal and insulation, as well as aluminum, stainless steel, and galvanized steel weather jackets. Who else but Eddyfi to reinvent an eddy current technique and redefine CUI programs. Got Lyft?
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window