where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
306 views
Technical Discussions
William Blum
Consultant, Training, Level III Services
NDT Consulting Group Inc., USA, Joined Nov 2000, 89

William Blum

Consultant, Training, Level III Services
NDT Consulting Group Inc.,
USA,
Joined Nov 2000
89
09:03 Nov-26-2001
Need UT B-Scan for short term lease

A major client needs to lease the following type of UT equipment for about two months.

B-scan equipment with the same or similar (or of course better) characteristics as the Flaw Imager from Diagnostic Sonar with a 5 MHz linear array transducer with 125 elements. The coverage width of the probe should be at least 50 mm. The equipment will be used for inspection of the bonding between a skin (t=2 mm) and a rib (t=1 mm) in carbon fibre composite. The equipment shall be able to detect 6x6 mm defects in the bonding.

Please contact Bill Blum at wblum@brighttechnical.com.



    
 
 Reply 
 

Product Spotlight

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Semi-Automated Phased Array Immersion System for Small Composite Parts

Turn-key semi-automated system as an improved and affordable solution for inspection of small comp
...
osite parts. Includes support table, immersion tank, scanner, PA instrument, PC, Analysis software, database, wedge management and other options.
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window