where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

602 views
Technical Discussions
Rolf Diederichs
Director,
NDT.net, Germany, Joined Nov 1998, 604

Rolf Diederichs

Director,
NDT.net,
Germany,
Joined Nov 1998
604
00:40 Oct-01-1998
NDTnet October '98: Forum Introduction

Most of this month's issue focuses on the full-text papers of the ECNDT '98

Sessions:
Chemical and Petrochemical Industries - NDT of Welds - Nuclear Industry.

In conjunction with this month's topics, we are pleased to introduce
Ed Ginzel, Rainer Maier and Hermann Wüstenberg as Virtual Session
Chairmen of our Discussion Forum.

Ed Ginzel
Materials Research Institute.
His area of expertise is the NDT of welds.

Rainer Meier
works for the Siemens KWU Power Generation Group

Hermann Wuestenberg of BAM Berlin.
He is Member of Germany's Reactor Safety Board.

For a Start:
- Discussion of TOFD continues with new arguments.
Instead of replacing other techniques, should TOFD be used as an add-on,
increasing the Probability Of Detection (POD) from 90 to 95% TOFD ?!

- Is the worldwide nuclear industry safe enough?
Or do we need more NDT service intervals?

- NDT helps make environments safe from accidents in the Chemical and
Petrochemical Industries

We welcome any questions or comments that you may have.

Rolf Diederichs


    
 
 
nksamy
Consultant
Hi-Tech NDT Inspection Services (S) Pte Ltd, Algeria, Joined Jul 2000, 4

nksamy

Consultant
Hi-Tech NDT Inspection Services (S) Pte Ltd,
Algeria,
Joined Jul 2000
4
05:07 Aug-19-2000
Re: NDTnet October '98: Forum Introduction
: Most of this month's issue focuses on the full-text papers of the ECNDT '98

: Sessions:
: Chemical and Petrochemical Industries - NDT of Welds - Nuclear Industry.

: In conjunction with this month's topics, we are pleased to introduce
: Ed Ginzel, Rainer Maier and Hermann Wüstenberg as Virtual Session
: Chairmen of our Discussion Forum.

: Ed Ginzel
: Materials Research Institute.
: His area of expertise is the NDT of welds.

: Rainer Meier
: works for the Siemens KWU Power Generation Group

: Hermann Wuestenberg of BAM Berlin.
: He is Member of Germany's Reactor Safety Board.

: For a Start:
: - Discussion of TOFD continues with new arguments.
: Instead of replacing other techniques, should TOFD be used as an add-on,
: increasing the Probability Of Detection (POD) from 90 to 95% TOFD ?!

: - Is the worldwide nuclear industry safe enough?
: Or do we need more NDT service intervals?

: - NDT helps make environments safe from accidents inthe Chemical and
: Petrochemical Industries

: We welcome any questions or comments that you may have.

: Rolf Diederichs




    
 
 

Product Spotlight

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

Lyft™: Pulsed Eddy Current Reinvented

PEC Reinvented—CUI Programs Redefined Corrosion under insulation (CUI) is possibly the greatest u
...
nresolved asset integrity problem in the industry. Current methods for measuring wall thickness with liftoff, without removing insulation, all have severe limitations. Eddyfi introduces Lyft — a reinvented, high-performance pulsed eddy current (PEC) solution. The patent- pending system features a state-of-the-art portable instrument, real- time C-scan imaging, fast data acquisition with grid-mapping and dynamic scanning modes, and flexibility with long cables. It can also scan through thick metal and insulation, as well as aluminum, stainless steel, and galvanized steel weather jackets. Who else but Eddyfi to reinvent an eddy current technique and redefine CUI programs. Got Lyft?
>

HD-CR 35 NDT Computed Radiography System

Portable high-resolution CR scanner for all radiography applications - weld testing, profile images
...
and aerospace. No matter what type of radiographic testing you are performing, the unique TreFoc Technology of the HD-CR 35 NDT imaging plate scanner always guarantees the highest image quality.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window