where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

NOVO DR
develops and manufactures cutting edge Portable Digital Radiography X-ray Inspection Systems.
783 views
Technical Discussions
Erika
Erika
01:47 Jan-09-2002
ACFM

I am currently in NDI and am seeking certification in ACFM.
Does anyone have any input on the best place to obtain this?
Thanks!


 
 Reply 
 
Guido Crapels
Guido Crapels
01:52 Jan-09-2002
Re: ACFM
: I am currently in NDI and am seeking certification in ACFM.
: Does anyone have any input on the best place to obtain this?
: Thanks!
__________________________
We have some ACFM experience with TSC in Milton Keynes, Great Britain. The Welding Institute can give training courses which conform to EN473 and ISO9712. Take a look at the following URL:
http://www.tscuk.demon.co.uk/tschome.htm


 
 Reply 
 
Martin Lugg
Consultant,
Eddyfi Technologies, United Kingdom, Joined Nov 2000, 27

Martin Lugg

Consultant,
Eddyfi Technologies,
United Kingdom,
Joined Nov 2000
27
02:35 Jan-09-2002
Re: ACFM
: I am currently in NDI and am seeking certification in ACFM.
: Does anyone have any input on the best place to obtain this?
: Thanks!
.
Training courses leading to operator certification are available from the UK Welding Institute (TWI). These are routinely run in Middlesbrough, UK, but can also be run overseas if there is sufficient demand.

Please contact Jim Sheppard at TWI North:
JSheppard@twi.co.uk
Tel: +44 1642 210512



 
 Reply 
 
Joel Light
Consultant, Corrosion Prevention
Deepwater Corrosion Services Inc., USA, Joined Jul 2002, 12

Joel Light

Consultant, Corrosion Prevention
Deepwater Corrosion Services Inc.,
USA,
Joined Jul 2002
12
03:23 Jul-31-2002
Re: ACFM
: : I am currently in NDI and am seeking certification in ACFM.
: : Does anyone have any input on the best place to obtain this?
: : Thanks!
: __________________________
: We have some ACFM experience with TSC in Milton Keynes, Great Britain. The Welding Institute can give training courses which conform to EN473 and ISO9712. Take a look at the following URL:
: http://www.tscuk.demon.co.uk/tschome.htm
.
___________________________________________
There is a NDT Training center in Houston, TX that offers ACFM Certification courses.
Hellier Training Institute.
Not sure if this is still the correct phone number but try (281) 873-0980



 
 Reply 
 

Product Spotlight

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

Surf-X® Array Probe

Introducing the Surf-X family of flexible Eddy Current Array (ECA) probes. Featuring unique multiple
...
coil sets and proprietary X-PROBE technology, Surf-X array probes can quickly and accurately handle a range of inspection applications, from inspecting corrosion or cracking in pipes, pressure vessels, or tanks, to assessing and sizing cracks in raised welds and friction stir welds.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window