where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Hillger Ing. Büro
was founded in 1984 and develops special ultrasonic imaging systems for high-tech materials.

778 views
Technical Discussions
Roelof Versteeg
R & D
Columbia University, USA, Joined Nov 1998, 1

Roelof Versteeg

R & D
Columbia University,
USA,
Joined Nov 1998
1
05:13 Oct-06-1998
Good book to teach NDE/NDT with wave emphasis?

I am planning a new course which will mainly focus
on using em & acoustic waves in tomographic
and reflectivity mode. I am a geophysicist, so
have that background, but am looking to give it
a NDE/NDT flavor (so as to appeal to engineers as well)

I've been looking around for some books (undergraduate
junior/senior level) but haven't found anything.
I'd appreciate any pointers.

Regards

Roelof Versteeg

versteeg@ldeo.columbia.edu


    
 
 
Ed Ginzel
R & D, -
Materials Research Institute, Canada, Joined Nov 1998, 1236

Ed Ginzel

R & D, -
Materials Research Institute,
Canada,
Joined Nov 1998
1236
05:02 Oct-06-1998
Re: Good book to teach NDE/NDT with wave emphasis?
Roelof:
You asked about books on EM and Acoustic waves applied
in tomographic & reflective modes.

My beginings were also in geophysics and I found the
cross-over to NDT relatively easy (in fact some of the
DSP used in geophysics 25 years ago only recently
found its way into NDT).

About the books: I assume you want application type (not just wave mechanics).

Medical books might be a good source too.
e.g. Handbook of Ultraonic B-scanning in Medicine, by R.M.LUNT, Cambridge Press

On microwaves try:
Microwave nondestructive testing methods / Alfred J. Bahr. -
Series:
Nondestructive testing monographs and tracts, v. 1
Authors:
Bahr, Alfred J., 1935-
Publisher:
New York : Gordon and Breach Science Publishers, c1982.

Call Number:
TA417.2.B28 1982
ISBN/ISSN:
0677059392

In ultrasonics there are many. 2 include:

Ultrasonic Imaging: Seeing by sound:
Greguss, Pal
London, Focal Press, 1980
ISBN 0240510399

Ultrasonics: Fundamentals, Technology, Applications
Ensminger, Dale
Marcel Dekker, 1988
ISBN 0824776593


Dr. Tony Sinclair at the U of Toronto might have suggestions:
sinclai@mic.utoronto.ca

: I am planning a new course which will mainly focus
: on using em & acoustic waves in tomographic
: and reflectivity mode. I am a geophysicist, so
: have that background, but am looking to give it
: a NDE/NDT flavor (so as to appeal to engineers as well)

: I've been looking around for some books (undergraduate
: junior/senior level) but haven't found anything.
: I'd appreciate any pointers.

: Regards

: Roelof Versteeg

: versteeg@ldeo.columbia.edu




    
 
 
Udo Schlengermann
Consultant, -
Standards Consulting, Germany, Joined Nov 1998, 176

Udo Schlengermann

Consultant, -
Standards Consulting,
Germany,
Joined Nov 1998
176
09:31 Oct-07-1998
Re: Good book to teach NDE/NDT with wave emphasis?
reply of Udo Schlengermann (uschlengermann@krautkramer.de)

Looking to the first replies I noticed that the recommended books were published long time ago, i.e. they cannot include references to modern techniques and applications.

Krautkramers' book
'Ultrasonic Testing of Materials'
was completely revised in 1990,
4th edition, Springer Verlag, New York,
ISBN 0-387-51231-4

kind regards

Udo Schlengermann
--------------------------

: I am planning a new course which will mainly focus
: on using em & acoustic waves in tomographic
: and reflectivity mode. I am a geophysicist, so
: have that background, but am looking to give it
: a NDE/NDT flavor (so as to appeal to engineers as well)

: I've been looking around for some books (undergraduate
: junior/senior level) but haven't found anything.
: I'd appreciate any pointers.

: Regards

: Roelof Versteeg

: versteeg@ldeo.columbia.edu




    
 
 

Product Spotlight

XRHRobotStar

In high volume industries like automotive the requirement for a hundred percent X-ray inspection c
...
reates a bottleneck in the production. The XRHRobotStar is a fully Automated Defect Recognition (ADR) capable robot-system that allows an ultra-fast in-line inspection.
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

High-end Ultrasonic Flaw Detector with 32:128PR PAUT and 2-ch TOFD: SyncScan 2

SIUI’s newly launched SyncScan 2, is a high-end ultrasonic flaw detector with 32:128PR PAUT and
...
2-ch TOFD, which can maximize your efficiency for PA and TOFD. ● Support PA/TOFD/UT ● 32-ch PA is more suitable for inspection on extra-thick wall and high-attenuation material. ● 32-ch PA and 2-ch TOFD work simultaneously. ● Support PR mode for corrosion inspection.
>

AMIGO2

TSC Amigo2 - ACFM technology has developed a solid reputation for accurately detecting and sizing
...
surface-breaking cracks through paint and coatings. As the industry demands increased performance in speed, signal quality, and portability, it’s time for an evolution. It’s time for Amigo2.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window