where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

285 views
Technical Discussions
Jaques Townsend
NDT Inspector
ULTRASOM Logística Townsend & Rocha Almeida Serviç, Brazil, Joined Mar 2001, 13

Jaques Townsend

NDT Inspector
ULTRASOM Logística Townsend & Rocha Almeida Serviç,
Brazil,
Joined Mar 2001
13
00:25 Feb-02-2002
Looking for used parabolic dish UWC-2000 concentrator for Ultraprobe

Parabolic dish, ultrasound wave concentrator UWC-2000 model, manufactured by UE Systems; must to be in perfect conditions.

All offerings are wellcome by e-mailing to
townsend@hotlink.com.br


I`m also needing to print ultrasonic noise detected by graphic data recordings.
Can you suggest me how to adapt a graphic recorder and a printer to make the TPM field reporting when using the ultrasonic ULTRAPROBE 2000 like at Leak Detection, Bearing & Mechanical Inspection, Electrical Inspection, Valve & Steam Trap Inspection, Heat Exchangers & Boilers and Condensers,
Compressor Inspection or Wind Noise & Water Leak Detection ???
All helps are wellcome.

Thanks,
Jaques




    
 
 

Product Spotlight

NEOS III

NEOS III is Logos Imagings lightest DR system. With a built in \r\nbattery and internal wireless c
...
ommunication, the NEOS III is perfect \r\nfor users that want to quickly assess an item.
>

I&T Nardoni

NDT, RESEARCH AND DEVELOPMENT OF NEW METHODOLOGY, TRAINING CENTER I&T NARDON INSTITUTE was idiated
...
in 1988 by Giuseppe Nardoni, now president and owner of the company, based on his multi-annual and international experience in the field of NDT.
>

High Resolution Industrial CT System for Small/Medium Size Parts Inspection

The YXLON FF35 CT computed tomography system is designed to achieve extremely precise inspection res
...
ults for a wide range of applications. Available in a single or dual tube configuration, it is perfect for very small to medium size parts inspection in the automotive, electronics, aviation, and material science industries.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window