where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

289 views
Technical Discussions
Mirko Pikalo
Director
STO RAvne - NDT lab, Slovenia, Joined Jul 2000, 2

Mirko Pikalo

Director
STO RAvne - NDT lab,
Slovenia,
Joined Jul 2000
2
00:28 Feb-16-2002
Penetrant testing facilities for heavy investment castings

Hi!

We are using red water washable penetrants to test of heavy steel investment castings (typical size range 0,5-2 m, weight 0,5 -5 tons, 10-20 pieces per month). Now, the regulations in the field of environment and health protection have been strained in our country and we have to arrange the corresponding work post to prevent penetrants to drain uncontrolled and to improve the health protection of inspectors.
I will be gratefull for any information that could help me to prepare an investment project.

Mirko Pikalo
SŽ-STO Ravne d.o.o.
Koroska c. 14
SI-2390 Ravne na Koroškem
tel: +386 (02) 82 15 408
fax: +386 (02) 82 15 407





 
 Reply 
 

Product Spotlight

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window