The Largest Open Access Portal of Nondestructive Testing (NDT)

EXTENDE EXTENDE, optimize your NDT inspections projects thanks to simulation.

245 views Technical Discussions kamchiu kamchiu 01:38 Feb-02-2001 1.12% C Steel Hello All, I would to ask the ultrasonic velocities of 0.3%C steel and 1.12%C steel ? Also, the velocities of pure Lead and pure Zinc. Thanks kamchiu                  Reply  Translate  Close   Eng. Adrián Espinoza Eng. Adrián Espinoza 03:18 Jul-18-1998 Re: Thickness measurement of solder paste : We need to measure the thickness of a paste. The thickness of the paste is a variable dependent upon the formulation of the material that is being made. Paste thickness will be in the range of .030 to .070. : Does anyone have any ideas? We currently don't have equipment but we wanna buy someone with low cost? : Do you can send me any options?                  Reply  Translate  Close   Product Spotlight Varex Imaging Large Field of View (FOV) Digital Detector Arrays (DDAs) StandVarex Imaging A larger FOV DDA can reduce the space and volume of the X-ray inspection system on the factory floor ... , enable faster scanning times, better throughput and better resolution images at a lower dose. Customers can also save time and money. With these benefits in mind, Varex Imaging has designed a family of large FOV detectors (4343HE, XRD 1611, 4343DX-I, 4343CT) for our industrial imaging customers. > SONOAIR - air-coupled Phased Array Ultrasonic Inspection System StandSONOTEC Ultraschallsensorik Halle GmbH For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors, ... the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers. > 5 Showcases5 Videos X-ray CT aids research into defect formation in AM parts StandNikon Metrology X-ray CT is used to research how additive manufacturing process parameters influence defect format ... ion in AM parts. > 6 Showcases3 Videos FD800 Bench Top Flaw Detectors StandElcometer NDT The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater ... ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs. > 3 Showcases more Showcases Share... Home Exhibition Archive Forum Jobs MyNDT Network Events Directory NDT A-Z Advertise Privacy Policy Contact About © NDT.net - Where expertise comes together. The Largest Open Access Portal of Nondestructive Testing (NDT)- since 1996 We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info Accept top this is debug window s