where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
354 views
Technical Discussions
Li Zhang
Student
umass, USA, Joined Mar 2002, 2

Li Zhang

Student
umass,
USA,
Joined Mar 2002
2
00:56 Mar-25-2002
Face plate for contact transducer

Hello, all. My name is Li Zhang, a student of Univ. of Massachusetts.

I am in a project of making contact ultrasonic transducer. The transcucer will be used in contact with aluminum or steel. I don't know what kind of wear plate (face plate) is available. I have checked alumina, the price is incredibly high. Anybody knows alternatives? It will be great if you can also give me some websites or company names. I appreciate for your help.

Li




 
 Reply 
 
Ed Trotter
Ed Trotter
09:36 Mar-26-2002
Re: Face plate for contact transducer
: Hello, all. My name is Li Zhang, a student of Univ. of Massachusetts.
.
: I am in a project of making contact ultrasonic transducer. The transcucer will be used in contact with aluminum or steel. I don't know what kind of wear plate (face plate) is available. I have checked alumina, the price is incredibly high. Anybody knows alternatives? It will be great if you can also give me some websites or company names. I appreciate for your help.
.
: Li
.
Why don't you try Lucite?



 
 Reply 
 

Product Spotlight

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

Echomac® PA Bar Tester

The Echomac® PA BT provides 100% inspection of round bars for core and surface defects, at speeds u
...
p to 2 m/sec, depending on the specific application. The unit allows producers to handle a much larger range of diameters in one installation, and is available in 3 models to test 10 – 75mm diameter (small model); 20 – 130mm (medium model) or 50 – 254mm (large model) bars.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

TraiNDE UT

TraiNDE UT is a virtual tool associated with a signal database which simulates real inspection con
...
ditions for numerous applications (Type A/V1 block, DAC block, welds and plates).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window