where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1 views
Technical Discussions
James L Duke Jr
James L Duke Jr
06:05 May-08-2002
Re: NDT and Inspection Jobs
James L. Duke, Jr.
14394 South Elm Avenue
Glenpool, Oklahoma 74033
(918) 322-5642 home

Hello, my name is James L. Duke, Jr. I have completed the Master Welder Program and graduated as of late September, 2001 with an Associates Degree in Welding Technology, which covers Quality Control/Quality Assurance and Weld Inspection.
I would be very grateful if you would take a few moments to view my resume. I am confident with my welding experience, training, and technical aptitude. I would be an asset in your company as an entry-level NDT/weld inspector.
I would appreciate the opportunity for a personal interview and will make myself available at your convenience. Thank you for your time, and I look forward to meeting you soon.

Sincerely,

James L. Duke, Jr.

14394 South Elm Avenue
Glenpool, Oklahoma 74033

Phone (918) 322-5642
E-mail: djimnred@msn.com

James L. Duke, Jr.


Objective To obtain an entry-level position as a QC/NDT welding inspector

Education Central High School Macon, GA Graduated 1991
Tulsa Welding School Tulsa, OK
Welding Course July, 2000- Feb., 2001
Weld Inspection Course Feb., 2001- Sept., 2001

Work Experience Philip Services December, 2001 – present
Sand Springs, OK
Weld Inspector

Tank Consultants Mechanical Services September, 2000 – December, 2001
Tulsa, OK
Shop Maintenance

Maintenance Specialist Jan., 1997 – Sept., 2000
Tulsa, OK
Foreman, welder

Bay Tank June, 1996 – Jan., 1997
Tulsa, OK
Helper

Atwood’s Apr., 1995 – June, 1996
Sapulpa, OK
Tire repair and sales

Certifications and Magnetic Particle Level II certification (Tank Consultants)
Licenses
Liquid Dye Penetrant Level II certification (Tank Consultants)

Powered Industrial Truck Operator Training certification (OSHA approved)

Associate of Occupational Studies in Welding Technology

Military U.S. Army Aug., 1991 – Dec., 1994

Oklahoma National Guard Apr., 1995 – Jan., 2000





 
 Reply 
 
Ehsan Fatemi
Ehsan Fatemi
07:36 Dec-22-2002
Re: NDT and Inspection Jobs

: Submit your resume!
.
: Find Jobs!=i am N.D.T.inspectionform IRAN with 12 years experience on various projects .i have level II (UT)PCN &RT& RTI &MT&PT (ASNT)alreadyiam busy on offshore platform.
best regardes E.fatemi
.

: Now hiring!
.
: Visit www.InspectionJobs.com
.



 
 Reply 
 

Product Spotlight

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
...
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
>

NEW Wheel Type Phased Array Probe

DOPPLER NEW Wheel Type Phased Array Probe, more stable, new tyre makes lesser acoustic attenuation
...
, much lighter makes easier to handle, more slim size, magnetic and mechanical encoder optional etc...more
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window