where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

PBP Optel sp. z o.o.
Weare searching new ways - in ultrasonic techniques- in creation of new productsUltrasonic instruments - Ultrasonic Testing Card

629 views
Technical Discussions
Morrie Stonehouse
NDT Inspector
ATC Quality Services Ltd, Canada, Joined Aug 2001, 4

Morrie Stonehouse

NDT Inspector
ATC Quality Services Ltd,
Canada,
Joined Aug 2001
4
00:12 Apr-08-2002
Portable Metal Analyzer

I am looking to purchase a new or used portable metal analyzer. Please, forward the make, model and an approximate cost.
Thank you.


    
 
 
Guido Crapels
Guido Crapels
09:08 Apr-10-2002
Re: Portable Metal Analyzer
: I am looking to purchase a new or used portable metal analyzer. Please, forward the make, model and an approximate cost.
: Thank you.
.

Take a look at the following site:

http://www.thermo.com/eThermo/CDA/Products/Product_Detail/1,1075,14159-137-X-137-11949,00.html

This describes the Metallurgist Pro portable analyzer. We have used its predecessor, the model 9277, a lot. This new generation probably offers more software assistance. As I was told, the sensor sensitivity should be improved, too. This may give rise to shorter acquisition intervals.
We also used the Spectroport apparatus, which is dedicated - but not confined - to analyzing carbon steel grades. It is a spark-emission spectrometer and deploys an argon shielded spark to analyze the carbon content (which is also the most tedious element to be pinned down !). Without the use of argon, other "popular" elements can still be analyzed, but not the carbon.
Take a look at the Spectro website:

http://www.spectro-ai.com/pages/e/fr_buildfr.htm?/pages/e/p1101.htm



    
 
 
Christoph Schnitger
Christoph Schnitger
09:42 Apr-10-2002
Re: Portable Metal Analyzer
Hello...

i have 2 used metal analysator on stock ( GNR & Spectro ) if you have some intereest please come back
and submit your parameters ( channels & elements )

Greetings from Germany

C.Schnitger
TCP Prüftechnik


    
 
 
Morrie Stonehouse
NDT Inspector
ATC Quality Services Ltd, Canada, Joined Aug 2001, 4

Morrie Stonehouse

NDT Inspector
ATC Quality Services Ltd,
Canada,
Joined Aug 2001
4
07:50 Apr-12-2002
Re: Portable Metal Analyzer
: Hello...
.
Thanks for your reply. I am looking for a non-atomic analyzer that has the capability of analyzing carbon steels and stainless steels.


    
 
 
Jim Soulek
Jim Soulek
04:10 Jun-16-2002
Re: Portable Metal Analyzer
My company, Worldwide Analytical Systems, manufactures moble spectrometers which are used throughout the world. If you are still in the market for an instrument, please look at my company's web sight.

www.was-america.com


: : I am looking to purchase a new or used portable metal analyzer. Please, forward the make, model and an approximate cost.
: : Thank you.
: .
.
: Take a look at the following site:
.
: http://www.thermo.com/eThermo/CDA/Products/Product_Detail/1,1075,14159-137-X-137-11949,00.html
.
: This describes the Metallurgist Pro portable analyzer. We have used its predecessor, the model 9277, a lot. This new generation probably offers more software assistance. As I was told, the sensor sensitivity should be improved, too. This may give rise to shorter acquisition intervals.
: We also used the Spectroport apparatus, which is dedicated - but not confined - to analyzing carbon steel grades. It is a spark-emission spectrometer and deploys an argon shielded spark toanalyze the carbon content (which is also the most tedious element to be pinned down !). Without the use of argon, other "popular" elements can still be analyzed, but not the carbon.
: Take a look at the Spectro website:
.
: http://www.spectro-ai.com/pages/e/fr_buildfr.htm?/pages/e/p1101.htm
.



    
 
 

Product Spotlight

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
...
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
>

HD-CR 35 NDT Computed Radiography System

Portable high-resolution CR scanner for all radiography applications - weld testing, profile images
...
and aerospace. No matter what type of radiographic testing you are performing, the unique TreFoc Technology of the HD-CR 35 NDT imaging plate scanner always guarantees the highest image quality.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window