where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

PBP Optel sp. z o.o.
Weare searching new ways - in ultrasonic techniques- in creation of new productsUltrasonic instruments - Ultrasonic Testing Card
751 views
Technical Discussions
Aziz U Rehman
R & D
Quaid-e-Azam University, Islamabad, Pakistan, Joined Apr 2001, 11

Aziz U Rehman

R & D
Quaid-e-Azam University, Islamabad,
Pakistan,
Joined Apr 2001
11
07:47 Apr-10-2002
Looking for a Research & Development Job in NDT.

Doctorate in MAAM (Mécanique Appliqué, Acoustique et Matériaux) with specialization in Ultrasonic Nondestructive Testing, with a strong background in Mechanical Engineering, worked as a Postdoctoral Research Fellow at Industrial Material Institute, National Research Council of Canada. A Gold Medal Bachelor’s in Mechanical Engineering and a Master’s in Acoustics & Industrial Vibrations, has given a thorough understanding of thermal, structural & vibration analysis/design. Also well versed with the current state-of-the-art computer-aided design and analysis tools.

During the stay at Shaw Pipeline Services Ltd., A ShawCor Company, developed the thorough understanding of the current state of the art, Automated Ultrasonic Testing. Worked independently as well as in a team to finalize the design of Ultrasonic Phased Array System for the Girth Weld Inspection.



    
 
 Reply 
 
Bob Hay
Engineering,
TISEC Inc., Canada, Joined Apr 2002, 3

Bob Hay

Engineering,
TISEC Inc.,
Canada,
Joined Apr 2002
3
05:57 Apr-14-2002
Re: Looking for a Research & Development Job in NDT.
Check out link below


    
 
 Reply 
 
Terry Oldberg
Engineering, Mechanical Electrical Nuclear Software
Consultant, USA, Joined Oct 1999, 42

Terry Oldberg

Engineering, Mechanical Electrical Nuclear Software
Consultant,
USA,
Joined Oct 1999
42
01:04 Apr-26-2002
Re: Looking for a Research & Development Job in NDT.
I'd avoid NDT as a field of research, for it has fundamental problems ( see http://www.ndt.net/article/v04n05/oldberg/oldberg.htm ) and people in positions of power refuse to address them. As a result, you'd either sacrifice your integrity or be in an endless, fruitless struggle with the powers that be.


    
 
 Reply 
 
Arezoo Ebn Ahmady
Arezoo Ebn Ahmady
06:35 Aug-21-2002
Re: Looking for a Research & Development Job in NDT.
: Ph.D. in Health Management.
: Three researches in Sustainable development, Comparative Study on Referral System on Health Care and Health Insurance Approaches in Referral System.
12 years work expereinces at International Organizations.
: Good knowledge of computer
: Active member of the Sustainable Health Management Development Inst. in Iran



    
 
 Reply 
 

Product Spotlight

MUSE Mobile Ultrasonic Equipment

The MUSE, a portable ultrasonic imaging system, was developed for in-field inspections of light-weig
...
ht structures. The MUSE consists of a motor-driven manipulator, a water circulation system for the acoustic coupling and a portable ultrasonic flaw detector (USPC 3010). The MUSE provides images of internal defects (A-, B-,C- and D-scan).
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window