where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

457 views
Technical Discussions
Chris Vilaire
Chris Vilaire
02:09 Apr-15-2002
2nd hand Infrared Thermography

Dear all, is there any body selling 2nd hand IR Thermography equipment? I need it for typically checking building facade in this tropical country, for cementitious/concrete based materials.

Thanks in advance,
CV


    
 
 
Peter Simpson
Director,
Ashtead Technology Ltd, United Kingdom, Joined Oct 1999, 12

Peter Simpson

Director,
Ashtead Technology Ltd,
United Kingdom,
Joined Oct 1999
12
00:05 Apr-15-2002
Re: 2nd hand Infrared Thermography
: Dear all, is there any body selling 2nd hand IR Thermography equipment? I need it for typically checking building facade in this tropical country, for cementitious/concrete based materials.
.
: Thanks in advance,
: CV
.

As an alternative to purchasing second hand equipment would the availability to rent meet your requirements. If this would be of interest please contact Neil Christie at our Singapore office who will be able to assist, e-mail neil.Christie@ashtead.com.sg. Unfortunately we would not have any second hand equipment for sale at this time.


    
 
 
donny
donny
02:15 Apr-16-2002
Re: 2nd hand Infrared Thermography
: Dear all, is there any body selling 2nd hand IR Thermography equipment? I need it for typically checking building facade in this tropical country, for cementitious/concrete based materials.
.
: Thanks in advance,
: CV
.
dear peter
I have inframetrics 760LW, please reach me at donny006@cbn.net.id


    
 
 

Product Spotlight

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

NEW! The PragmaPro Instrument Platform

The PragmaPro is based on a modular cartridge technology and supports various NDT instrument modal
...
ities such as UT, PAUT, ECT and many more. This new platform is based on a machined, powder-coated aluminum frame for shock-proofness, best sealing qualities and maximum heat dissipation. This is practical to extend the outdoor temperature range and/or to extend the power injected in the transducers. The PragmaPro is aiming at a very wide range of applications, such as weld scanning, corrosion mapping and composite testing.
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window
s