Main activity of our organisation is development and distribution of NDT devices. In the magazine BINDT ¹9 (September, 2001), page 574, and on ww-site (http://www.bindt.org) I have found the article "Welding polyethylene pipes with confidence ". I would ask you to provide us with some additional information on this project - names and addresses of the participants.
SIUI’s newly launched SyncScan 2, is a high-end ultrasonic flaw
detector with 32:128PR PAUT and
2-ch TOFD, which can maximize your
efficiency for PA and TOFD.
● Support PA/TOFD/UT
● 32-ch PA is more suitable for inspection on extra-thick wall and
● 32-ch PA and 2-ch TOFD work simultaneously.
● Support PR mode for corrosion inspection.
Pulse thermography is a non-contact test method that is ideal for
the characterization of thin fil
ms and coatings or the detection
defects. With a remarquable short test time and a high detection
sensitivity, the Telops TESTD-PT is the perfect tool for non-
destructive testing. With such high frame rates, it is even
to investigate highly conductive or diffusive materials.