where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

WesDyne International (AMDATA Products)
WesDyne is an engineering and technical services firm dedicated to providing standard and custom nondestructive examinations (NDE) products and systems
2712 views
Technical Discussions
DaoDuydung
DaoDuydung
08:42 May-16-2002
Wanted NDT Equipment and consummable from China

Dear Sir(s),
We are APAVE Vietnam and South East ASIA Co. that is
a brand of APAVE Lyonnaise France . One of our activities is NDT
in Industry and construction.
Now we are looking for NDT Equipment and consumables
made from CHINA , namely :
1. Ir192 Source for Industrial RT
2. Radiation surveymeter
3. Digital Ultrasonic Flaw detector
4. MT Yoke and Consumables...

We hope can get kind response from relevant sources
for this needs.


 
 Reply 
 
Michael Trinidad
Consultant,
LMATS Pty Ltd , Australia, Joined Jan 2003, 138

Michael Trinidad

Consultant,
LMATS Pty Ltd ,
Australia,
Joined Jan 2003
138
03:46 May-20-2002
Re: Wanted NDT Equipment and consummable from China
Dear Sir,

Having just gone through a massive purchase of NDT equipment I can give you some thoughts.

Generally the equipment from China is more costly than getting equipment from other countries and is not shall we say mainstream brand equipment. The internet is a handy tool for buying NDT equipment as you can get prices from all over the world. I would personally recommend:
a) Gammatec in South Africa gammatec@mweb.co.za
b) NDT Supply in USA http://www.ndtsupply.com/categories/xray.htmand
c) NDT Direct in USA
d) Russell NDE in Canada http://www.russelltech.com/

You can get reconditioned techop 660's at reasonable prices and much cheaper for gammamats.

If you want to compare the prices listed below is some Chinese sites I visited and got prices from.

http://www.ndtinfo.net/hichina2/maoji/maojiindex.html This site lists the majority of NDT retailers in Mainland China by city.

http://www.dltonghai.com/ another supplier of equipment

http://www.ndtinfo.net/hichina2/index.html China NDT homepage

Another thing to bear in mind is a lot of the equipment isn't actually made in China so you are paying a premium for equipment made overseas anyway.

I hope this is of some help. If I can be of any assistance please feel free to contact me at my email address.


Kindest Regards


Michael Trinidad




 
 Reply 
 
Dent McIntyre
Consultant, NDE Manager NDELevel III/3
NDT Consultant, Canada, Joined Nov 1998, 250

Dent McIntyre

Consultant, NDE Manager NDELevel III/3
NDT Consultant,
Canada,
Joined Nov 1998
250
05:48 May-22-2002
Re: Wanted NDT Equipment and consummable from China
Interesting Topic.
I have been travelling back and forth to China since 1986. I worked in China for 3 1/2 years as QA Manager and NDE Level III for a large Joint Venture. I am familar with many brands of Chinese NDE equipment. I have attended several Chinese NDE exhibitions and Conferences and have visited a Chinese factory that makes all sorts of NDE equipment.
In 1987 I purchased a portable UT scope for $2500 USD. I figured it would be a disposable machine. When it broke I would throw it away. That machine has been used and abused and is still operating today.
At the same time we also purchased several digital UT thickness gauges. We were not so lucky with these. These have long since been discarded.
Unless pricing has changed significantly recently, I found Chinese pricing extremely attractive. Getting spare parts and servicing outside of China was my biggest concern.
I would be pleased to share info privately.

Dent McIntyre
jdmcintyre@babcock.com

: Dear Sir,
.
: Having just gone through a massive purchase of NDT equipment I can give you some thoughts.
.
: Generally the equipment from China is more costly than getting equipment from other countries and is not shall we say mainstream brand equipment. The internet is a handy tool for buying NDT equipment as you can get prices from all over the world. I would personally recommend:
: a) Gammatec in South Africa gammatec@mweb.co.za
: b) NDT Supply in USA http://www.ndtsupply.com/categories/xray.htmand
: c) NDT Direct in USA
: d) Russell NDE in Canada http://www.russelltech.com/
.
: You can get reconditioned techop 660's at reasonable prices and much cheaper for gammamats.
.
: If you want to compare the prices listed below is some Chinese sites I visited and got prices from.
.
: http://www.ndtinfo.net/hichina2/maoji/maojiindex.html This site lists the majority of NDT retailers in Mainland China by city.
.
: http://www.dltonghai.com/ another supplier of equipment
.
: http://www.ndtinfo.net/hichina2/index.html China NDT homepage
.
: Another thing to bear in mind is a lot of the equipment isn't actually made in China so you are paying a premium for equipment made overseas anyway.
.
: I hope this is of some help. If I can be of any assistance please feel free to contact me at my email address.
.
:
: Kindest Regards
.
:
: Michael Trinidad
.



 
 Reply 
 
Michael Trinidad
Consultant,
LMATS Pty Ltd , Australia, Joined Jan 2003, 138

Michael Trinidad

Consultant,
LMATS Pty Ltd ,
Australia,
Joined Jan 2003
138
07:21 May-22-2002
Re: Wanted NDT Equipment and consummable from China
One of the most interesting machines I came accross was a UT set sold by one of the companies that actually had a TV set in it! I guess it would sell like hotcakes next month during the world cup!

Kindest Regards


Michael Trinidad
: .
.



 
 Reply 
 

Product Spotlight

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

PROlineTOP Plug & Play Ultrasonic inspection device

As Plug & Play solution it units all control and operation elements in a small housing and therefo
...
re replaces the typical control cabinet...
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window