06:33 Aug-20-2002 Simulation of Rayleigh waves using ANSYS
I am trying to simulate the propagation of Rayleigh waves in ANSYS 5.7 but am having great difficulty. I am very new to ANSYS (which doesn't help !!!) so is there anybody out there who could offer a little advice or help ??
The FlexoFORM™ solution integrates flexible phased array probe
a scanner to solv
e the challenges that come with inspecting pipe
When combined with a water column, this solution can be used to
easy-to-interpret data on elbows with diameters ranging from 4.5
in. OD up
to flat and offers many benefits.
The conformability is obtained with a flexible membrane filled with water between the transducer and
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
Available to order from stock in a range of 5MHz – 7.5MHz and from
16 to 64 elements. Designed w
ith piezo-composite elements, Phoenix
phased array probes provide high-resolution imaging to maximise
sensitivity; accurate ultrasonic detection and sizing of defects
in welds; and effective corrosion mapping. Housed in a rugged
stainless steel case for on-site industrial NDT applications.