where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

ULTRASOUND INSTITUTE
The Ultrasound Institute can develop new advanced ultrasonic measurement, imaging and NDT techniques for non-conventional applications.

756 views
Technical Discussions
Richard D. Roberts
Engineering, Executive Managment
Quest Integrity Group, USA, Joined Nov 1998, 78

Richard D. Roberts

Engineering, Executive Managment
Quest Integrity Group,
USA,
Joined Nov 1998
78
03:05 Nov-16-1998
Sliprings for Data Transfer

My company builds laser based NDT equipment. We are currently looking for a company who manafacturers sliprings. Sliprings are commonly used in UT, MFL & ET systems to transfer data from a spinning component. If anyone knows of a company that I can speak with I would greatly appreciate your assistance.

Regards,
Richard D. Roberts
QUEST Integrated, Inc.
1-253-872-1275


    
 
 
Wieslaw Bicz
Wieslaw Bicz
03:23 Nov-18-1998
Re: Sliprings for Data Transfer
: My company builds laser based NDT equipment. We are currently looking for a company who manafacturers sliprings. Sliprings are commonly used in UT, MFL & ET systems to transfer data from a spinning component. If anyone knows of a company that I can speak with I would greatly appreciate your assistance.

: Regards,
: Richard D. Roberts
: QUEST Integrated, Inc.
: 1-253-872-1275

You can try the connectors produced by mercotac (http://www.mercotac.com).
We are using them, are good and not expensive.

W. Bicz
Optel sp. z o.o.

(http://www.optel.com.pl)


    
 
 
John Rice
John Rice
09:39 Nov-15-1999
Re: Sliprings for Data Transfer
: : My company builds laser based NDT equipment. We are currently looking for a company who manafacturers sliprings. Sliprings are commonly used in UT, MFL & ET systems to transfer data from a spinning component. If anyone knows of a company that I can speak with I would greatly appreciate your assistance.

: : Regards,
: : Richard D. Roberts
: : QUEST Integrated, Inc.
: : 1-253-872-1275

: You can try the connectors produced by mercotac (http://www.mercotac.com).
: We are using them, are good and not expensive.

: W. Bicz
: Optel sp. z o.o.

: (http://www.optel.com.pl)




    
 
 
Pat Crist
Pat Crist
05:56 Feb-09-2000
Re: Sliprings for Data Transfer
: : My company builds laser based NDT equipment. We are currently looking for a company who manafacturers sliprings. Sliprings are commonly used in UT, MFL & ET systems to transfer data from a spinning component. If anyone knows of a company that I can speak with I would greatly appreciate your assistance.

: : Regards,
: : Richard D. Roberts
: : QUEST Integrated, Inc.
: : 1-253-872-1275

: You can try the connectors produced by mercotac (http://www.mercotac.com).
: We are using them, are good and not expensive.

: W. Bicz
: Optel sp. z o.o.

: (http://www.optel.com.pl)
We manufacture commutators for just for use in data transmission




    
 
 
PARAG RISBUD
PARAG RISBUD
07:16 Apr-22-2001
Re: Sliprings for Data Transfer
WE ARE MANUFACTURERS OF SLIPRINGS .YOU CAN SPEAK TO US ON
91-22-4222787.

FROM:
PARAG RISBUD
EL-MECH WORKS
318 UNIQUE
PRABHADEVI,MUMBAI 400025
INDIA


    
 
 

Product Spotlight

Wireless TOFD scanner

Quick, accurate and highly reproducible welds testing. The System operates wirelessly and is compat
...
ible with any type of Windows based Laptop, Desktop or Tablet.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

High Resolution Industrial CT System for Small/Medium Size Parts Inspection

The YXLON FF35 CT computed tomography system is designed to achieve extremely precise inspection res
...
ults for a wide range of applications. Available in a single or dual tube configuration, it is perfect for very small to medium size parts inspection in the automotive, electronics, aviation, and material science industries.
>

X-ray CT aids research into defect formation in AM parts

X-ray CT is used to research how additive manufacturing process parameters influence defect format
...
ion in AM parts.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window