where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

ULTRASOUND INSTITUTE
The Ultrasound Institute can develop new advanced ultrasonic measurement, imaging and NDT techniques for non-conventional applications.
183 views
Technical Discussions
H.ZAD
H.ZAD
04:01 Nov-04-2002
INDUSTRIAL X-RAY EQUIPMENT 42O KV WANTED

WE ARE SEEKING FOR A COMPANY WHO CAN SELL US A BRAND NEW OR OVERHAULED SECOND HAND X-RAY SYSTEM WITH FOLLOWING SPEC.
1- 320 UP TO 420 KV, REAL-TIME , IMAGE PROCESSING AND IMAGE INTENSIFIER ( MIN 60 LP/CM ), MOVEMENT OF SOURCE IN 3 AXIS BY OUTSIDE CONTROL( PART FIXED )
2-DIMENTIONS OF CABINET :
1000*1000*1000 MM
3-MAX PART WEIGHT : 100 KG
4-PARTS : CAST-IRON PARTS CASTED AND SHOT-BLASTED(AUTOMOTIVE PARTS)
5-SAFETY : MAX 0.25 MICRO SAVAR /HOUR
6-MAXIMUM THICKNESS IN THE PARTS 60 MM
7- SELLER SHOULD DO COMMISIONING AND TRAINING AND GIVE ONE YEAR GUARANTEE


    
 
 Reply 
 

Product Spotlight

SITEX CPSERIES

Teledyne ICM’s CPSERIES has been designed with a view to revolutionizing the handling and perfor
...
mances of portable X-Ray sets. Despite having managed to halve the weight of similar portable X-Ray generators available on the market (while continuing to provide the same power output), the SITEX CPSERIES generators feature a shutter, a laser pointer, a beryllium window, an aluminum filter and two integrated diaphragms (customized sizes are available upon request). Without compromising the robustness and reliability for which ICM products are renowned, the small size and light weight of the SITEX CPSERIES will radically change the way that you perform your RT inspections. And you will see a positive impact in terms of both quality and return on investment (ROI).
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

AMIGO2

TSC Amigo2 - ACFM technology has developed a solid reputation for accurately detecting and sizing
...
surface-breaking cracks through paint and coatings. As the industry demands increased performance in speed, signal quality, and portability, it’s time for an evolution. It’s time for Amigo2.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window