where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

684 views
Technical Discussions
James JOE
Sales
South Korea, Joined Sep 2002, 9

James JOE

Sales
South Korea,
Joined Sep 2002
9
08:47 Nov-28-2002
ET+UT system

Would you please supply proper system of detecting surface and internal defect for copper rod(wire) as belows conditions?
We would like discuss with our customer within next week.

1.Material : copper
2.dirmeter : 4mm ~ 70mm
3.speed : 100 meter / min, max.

best regards



 
 Reply 
 
LMQ
LMQ
00:30 Dec-04-2002
Re: ET+UT system (Eddy current system)
Sciensoria has a new low-cost 2-frequency eddy current system: the µDS-05 model, which can solve your application.

This instrument has 2 independent channels which can work at 2 different frequencies. The instrument can either work as 2 separate unit or a 2-frequency unit.

Please check the address

http://sciensoria.free.fr/brochure/index.pdf

Regards

: Would you please supply proper system of detecting surface and internal defect for copper rod(wire) as belows conditions?
: We would like discuss with our customer within next week.
.
: 1.Material : copper
: 2.dirmeter : 4mm ~ 70mm
: 3.speed : 100 meter / min, max.
.
: best regards
:
.



 
 Reply 
 
LMQ
LMQ
00:33 Dec-04-2002
Re: ET+UT system (Eddy current system)
Sciensoria has a new low-cost 2-frequency eddy current system: the µDS-05 model, which can solve your application.

This instrument has 2 independent channels which can work at 2 different frequencies. The instrument can either work as 2 separate unit or a 2-frequency unit.

Please check the address

http://sciensoria.free.fr/brochure/index.pdf (2 MByte).

Regards

: Would you please supply proper system of detecting surface and internal defect for copper rod(wire) as belows conditions?
: We would like discuss with our customer within next week.
.
: 1.Material : copper
: 2.dirmeter : 4mm ~ 70mm
: 3.speed : 100 meter / min, max.
.
: best regards
:
.



 
 Reply 
 

Product Spotlight

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

HD-CR 35 NDT Computed Radiography System

Portable high-resolution CR scanner for all radiography applications - weld testing, profile images
...
and aerospace. No matter what type of radiographic testing you are performing, the unique TreFoc Technology of the HD-CR 35 NDT imaging plate scanner always guarantees the highest image quality.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

Echomac® PA Bar Tester

The Echomac® PA BT provides 100% inspection of round bars for core and surface defects, at speeds u
...
p to 2 m/sec, depending on the specific application. The unit allows producers to handle a much larger range of diameters in one installation, and is available in 3 models to test 10 – 75mm diameter (small model); 20 – 130mm (medium model) or 50 – 254mm (large model) bars.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window