where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

ULTRASOUND INSTITUTE
The Ultrasound Institute can develop new advanced ultrasonic measurement, imaging and NDT techniques for non-conventional applications.

594 views
Technical Discussions
Damir Markucic
Damir Markucic
04:53 Dec-04-2002
measuring crack depth

Dear all,
would like to hear if anybody has experience with measuring depth of surface cracks in the range from 0.1 mm to several millimeters.
Which NDT methods/techniques used?
What is the order of achieved accuracy/precision?
On which materials applied?
With commercial or specially developed instrument?

Regards,
Damir


    
 
 
Phil Thayer
Sales, -
MISTRAS Products & Systems, USA, Joined Feb 2002, 12

Phil Thayer

Sales, -
MISTRAS Products & Systems,
USA,
Joined Feb 2002
12
05:08 Dec-04-2002
Re: measuring crack depth
Resistivity methold is good for conductive materials. Uses 4 point probe and metered current. Eddy current can also be used. Best on non-ferous materials. We have a new resistivity system, the M100A. If you like, visit our web page at pacndt.com. Our call 609-716-4051. Good luck eith your solution.


Dear all,
: would like to hear if anybody has experience with measuring depth of surface cracks in the range from 0.1 mm to several millimeters.
: Which NDT methods/techniques used?
: What is the order of achieved accuracy/precision?
: On which materials applied?
: With commercial or specially developed instrument?
.
: Regards,
: Damir
.



    
 
 

Product Spotlight

TVC awarded UKAS accreditation

TVC are delighted to finally announce we have been awarded UKAS accreditation for our calibration
...
laboratory. Laboratory accreditation to ISO/IEC 17025:2005 enables us to conduct the Electrical Verification of Ultrasonic Flaw Detection Equipment to BS EN 12668-1:2010. It has taken many months of hard work and we want to thank our staff for all their efforts during this massive undertaking.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

XRHRobotStar

In high volume industries like automotive the requirement for a hundred percent X-ray inspection c
...
reates a bottleneck in the production. The XRHRobotStar is a fully Automated Defect Recognition (ADR) capable robot-system that allows an ultra-fast in-line inspection.
>

PROlineTOP Plug & Play Ultrasonic inspection device

As Plug & Play solution it units all control and operation elements in a small housing and therefo
...
re replaces the typical control cabinet...
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window