where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

LECOEUR ELECTRONIQUE
The Specialist of electronics for ultrasonic testing.

481 views
Technical Discussions
Rainer Dicken
Rainer Dicken
09:53 Dec-10-2002
NADCAP Certified UT Subcontractor

Hello,

does anybody know an European company, which has got a NADCAP accredition?

We are interested in UT and DP also.

Best regards
R. Dicken


    
 
 
Matt Clark
Matt Clark
08:31 Dec-13-2002
Re: NADCAP Certified UT Subcontractor
: Hello,
.Good Day Rainer, In response to your enquiry re NADCAP approved company. My Company Belmont is approved by NADCAP & the likes of Rolls Royce. We are approved in Magnetic & Penetarnt Methods. I have also being involved in the Audit process in Europe for the last 18 months for all four methods UT,RT PT & MT. Please contact me if you would like any further info. For your inforamtion the European office for NADCAP (Pri) is at 18, Falcons Gate, Dean Road, Yate, Bristol. Contact Jenny Walters or Phil Ford. Tel 01454 326209. See www.pri.sae.org. www.eAuditNet.com

: does anybody know an European company, which has got a NADCAP accredition?
.
: We are interested in UT and DP also.
.
: Best regards
: R. Dicken
.



    
 
 

Product Spotlight

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

HD-CR 35 NDT Computed Radiography System

Portable high-resolution CR scanner for all radiography applications - weld testing, profile images
...
and aerospace. No matter what type of radiographic testing you are performing, the unique TreFoc Technology of the HD-CR 35 NDT imaging plate scanner always guarantees the highest image quality.
>

NEW Wheel Type Phased Array Probe

DOPPLER NEW Wheel Type Phased Array Probe, more stable, new tyre makes lesser acoustic attenuation
...
, much lighter makes easier to handle, more slim size, magnetic and mechanical encoder optional etc...more
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window