where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1809 views
Technical Discussions
Cesar Boynard
R & D
Instituto de Soldadura e Qualidade, Portugal, Joined Dec 2002, 11

Cesar Boynard

R & D
Instituto de Soldadura e Qualidade,
Portugal,
Joined Dec 2002
11
07:09 Dec-12-2002
EMAT device

I am looking for companies that can provide EMAT´s equipments.
I´d appreciate if someone can help me.
Thanks in advance.
My kind regards

Cesar


    
 
 
Borja Lopez
Borja Lopez
07:29 Dec-12-2002
Re: EMAT device
check www.innerspec.com


: I am looking for companies that can provide EMAT´s equipments.
: I´d appreciate if someone can help me.
: Thanks in advance.
: My kind regards
.
: Cesar
.



    
 
 
Grant Gordon
R & D
McDermott Technology, USA, Joined Jun 2002, 1

Grant Gordon

R & D
McDermott Technology,
USA,
Joined Jun 2002
1
07:55 Dec-12-2002
Re: EMAT device
Cesar:
McDermott Technology Inc. and our sister organization BWXT Services has a long history of designing application specific EMAT solutions for various commercial and military customers. For more information please see our web page http://www.mtiresearch.com/nde.html




    
 
 
Cesar Boynard
R & D
Instituto de Soldadura e Qualidade, Portugal, Joined Dec 2002, 11

Cesar Boynard

R & D
Instituto de Soldadura e Qualidade,
Portugal,
Joined Dec 2002
11
07:57 Dec-12-2002
Re: EMAT device
I have sended several e-mails to them, but so far, any reply.
: check www.innerspec.com
.
:
: : I am looking for companies that can provide EMAT´s equipments.
: : I´d appreciate if someone can help me.
: : Thanks in advance.
: : My kind regards
: .
: : Cesar
: .
.



    
 
 
Joe Buckley, Sonatest PLc
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 517

Joe Buckley, Sonatest PLc

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
517
08:10 Dec-12-2002
Re: EMAT device
Can you give us some more information on your application?

There are quite a few types of EMAT technology available- Most companies specialise in a subset of it.

e.g. at sonatest (http://www.sonatest-plc.com ) we supply flaw detectors and probes which are optimised for EMAT inspection of high temperature (e.g. boiler) service tubing.

Other companies make EMATS for other situations.

Joe


: I am looking for companies that can provide EMAT´s equipments.
: I´d appreciate if someone can help me.
: Thanks in advance.
: My kind regards
.
: Cesar
.



    
 
 
Cesar Boynard
R & D
Instituto de Soldadura e Qualidade, Portugal, Joined Dec 2002, 11

Cesar Boynard

R & D
Instituto de Soldadura e Qualidade,
Portugal,
Joined Dec 2002
11
08:25 Dec-12-2002
Re: EMAT device
::The company that I work with, ISQ, usually aplly several services of NDT(RT,UT,PT,MT,etc), in a wide range of equipment(Boilers, pipeline, heat exchanger etc), in general for chemichal and petrochemical industries. The requirements are, in general, measurements reduction and Flaws detection.
So we are looking for emat´s devices/probes that can supply such requirements and adapted to our ultrasonic equipments, if possible.

my regards
Cesar Boynard

: Cesar:
: McDermott Technology Inc. and our sister organization BWXT Services has a long history of designing application specific EMAT solutions for various commercial and military customers. For more information please see our web page http://www.mtiresearch.com/nde.html
.



    
 
 
Cesar Boynard
R & D
Instituto de Soldadura e Qualidade, Portugal, Joined Dec 2002, 11

Cesar Boynard

R & D
Instituto de Soldadura e Qualidade,
Portugal,
Joined Dec 2002
11
08:29 Dec-12-2002
Re: EMAT device
::Joe,
Thanks for your reply.
The company that I work with, ISQ-Portugal, usually aplly several services of NDT(RT,UT,PT,MT,etc), in a wide range of equipment(Boilers, pipeline, heat exchanger etc), in general for chemichal and petrochemical industries. The requirements are, in general, measurements reduction and Flaws detection.
So we are looking for emat´s devices/probes that can supply such requirements and adapted to our ultrasonic equipments, if possible.

my regards
Cesar Boynard

: Can you give us some more information on your application?
.
: There are quite a few types of EMAT technology available- Most companies specialise in a subset of it.
.
: e.g. at sonatest (http://www.sonatest-plc.com ) we supply flaw detectors and probes which are optimised for EMAT inspection of high temperature (e.g. boiler) service tubing.
.
: Other companies make EMATS for other situations.
.
: Joe
.
.
:
: : I am looking for companies that can provide EMAT´s equipments.
: : I´d appreciate if someone can help me.
: : Thanks in advance.
: : My kind regards
: .
: : Cesar
: .
.



    
 
 
Cesar Boynard
R & D
Instituto de Soldadura e Qualidade, Portugal, Joined Dec 2002, 11

Cesar Boynard

R & D
Instituto de Soldadura e Qualidade,
Portugal,
Joined Dec 2002
11
02:47 Dec-13-2002
Re: EMAT device
::Our especific range of applications are: thickness (5 up to 10 mm), material (carbon steel), Minimal Flaw sizing (0,5 mm), for on-site inspections.
We usually work with Krautkramer equipments, but if your devices can not be adapted to our equipments, there is no problem. So, you can send me a full quotation for complete system(Probe, hardware, software,etc).

my kind regards


: I am looking for companies that can provide EMAT´s equipments.
: I´d appreciate if someone can help me.
: Thanks in advance.
: My kind regards
.
: Cesar
.



    
 
 

Product Spotlight

NozzleScan: Radial nozzle scanner with probe skew

NozzleScan is a versatile manual scanning solution developed for the inspection of nozzle welds in
...
both set-through and set-on configurations. Available in both two-axis and three-axis instrument configurations and adaptable to cover a wide range of 90-degree nozzle sizes, from 3" upwards, on ferritic and austenitic materials.The transducer skew axis can also be adjusted, encoded and locked.
>

SITEX CPSERIES

Teledyne ICM’s CPSERIES has been designed with a view to revolutionizing the handling and perfor
...
mances of portable X-Ray sets. Despite having managed to halve the weight of similar portable X-Ray generators available on the market (while continuing to provide the same power output), the SITEX CPSERIES generators feature a shutter, a laser pointer, a beryllium window, an aluminum filter and two integrated diaphragms (customized sizes are available upon request). Without compromising the robustness and reliability for which ICM products are renowned, the small size and light weight of the SITEX CPSERIES will radically change the way that you perform your RT inspections. And you will see a positive impact in terms of both quality and return on investment (ROI).
>

GEKKO, Standard and Advanced phased-array for Easier inspection

With a 64-channel parallel architecture, GEKKO is a flaw detector offering at the same time conven
...
tional UT, standard PAUT, TOFD and real-time Total Focusing Method (TFM). GEKKO improves the detection, with better defects characterization and sizing as well as for misoriented defects. Some procedures require standard UT, others TOFD or PA. GEKKO includes all these techniques to offer a versatile and field-ready equipment. - 64:64 parallel channels - + 4 additional TOFD - Conventional UT channels - International code compliance: ASME, AWS, API, ASTM, ISO-EN Watch the video: https://youtu.be/kuEY_RwWS3Q
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window
s