where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

EXTENDE
EXTENDE, optimize your NDT inspections projects thanks to simulation.

552 views
Technical Discussions
James JOE
James JOE
02:52 Jan-18-2003
Detect porosity of Hot Stove

Would you please let us know how to solve this problem?
Our user would like to check inner porosity in Hot Stove Ceramic Burner as belows.
[sensor] here, contact or not
=================================
12mm steel (approx. 200'C)
--------------------------
50mm castable
-------------------------- <-- here porosity
65mm fireproof block
--------------------------
65mm fireproof block
--------------------------
200mm fireproof block
=================================
1250'C hot wind ----> go through

best regards

James JOE

ndtland@hihome.com




    
 
 
S.V.Swamy
Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex , India, Joined Feb 2001, 785

S.V.Swamy

Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex ,
India,
Joined Feb 2001
785
06:28 Jan-18-2003
Re: Detect porosity of Hot Stove
Try thermography. The areas with pores will have a different temperature when you look at the steel skin. You could prepare a standard artificial standard containing pores and calibrate the equipment.

S.V.Swamy

: Would you please let us know how to solve this problem?
: Our user would like to check inner porosity in Hot Stove Ceramic Burner as belows.
: [sensor] here, contact or not
: =================================
: 12mm steel (approx. 200'C)
: --------------------------
: 50mm castable
: -------------------------- <-- here porosity
: 65mm fireproof block
: --------------------------
: 65mm fireproof block
: --------------------------
: 200mm fireproof block
: =================================
: 1250'C hot wind ----> go through
.
: best regards
.
: James JOE
.
: ndtland@hihome.com
.



    
 
 

Product Spotlight

Swift & Scorpion2 - a state-of-the-art remote-control ultrasonic crawler

The Swift and Scorpion2 dry-coupled, remote-access ultrasonic crawler bring major efficiency and d
...
ata improvements to tank shell inspections and other structures such as vessels and offshore installations.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

SITEX CPSERIES

Teledyne ICM’s CPSERIES has been designed with a view to revolutionizing the handling and perfor
...
mances of portable X-Ray sets. Despite having managed to halve the weight of similar portable X-Ray generators available on the market (while continuing to provide the same power output), the SITEX CPSERIES generators feature a shutter, a laser pointer, a beryllium window, an aluminum filter and two integrated diaphragms (customized sizes are available upon request). Without compromising the robustness and reliability for which ICM products are renowned, the small size and light weight of the SITEX CPSERIES will radically change the way that you perform your RT inspections. And you will see a positive impact in terms of both quality and return on investment (ROI).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window