where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
381 views
Technical Discussions
John
Consultant
Australia, Joined Feb 2003, 1

John

Consultant
Australia,
Joined Feb 2003
1
03:41 Feb-23-2003
Who can help me?

I am a master of civil engineering and recetly i am want to creat a auto-defect-recognize system using detecting and evaluating the quality of concrete foundation of underground
wall.My main tool is wavelet,fractal and neural network.But i
am short of the real data.Who can help me to get the real data?
Let,s work together to do this and share the achivement and
happiness in the process and we will become frieds.



    
 
 Reply 
 
Todd Allen
Consultant, Ground Penetrating Radar ( GPR )
Radarview Concrete and Underground 3D Imaging, USA, Joined Jan 2003, 7

Todd Allen

Consultant, Ground Penetrating Radar ( GPR )
Radarview Concrete and Underground 3D Imaging,
USA,
Joined Jan 2003
7
01:14 Feb-25-2003
Re: Who can help me?
My name is Todd Allen. My company Radarview specializes in 3D Concrete and Underground Imaging. We use various NDT technologies to achieve this including Ground Penetrating Radar (GPR), Impact Echo Testing, Ferroscan, X-Ray, Ultrasonic Pulse-Velocity, etc.

You can reach me at 281-705-9476 24 hours.

Thanks,
Todd Allen

: I am a master of civil engineering and recetly i am want to creat a auto-defect-recognize system using detecting and evaluating the quality of concrete foundation of underground
: wall.My main tool is wavelet,fractal and neural network.But i
: am short of the real data.Who can help me to get the real data?
: Let,s work together to do this and share the achivement and
: happiness in the process and we will become frieds.
.



    
 
 Reply 
 

Product Spotlight

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

HD-CR 35 NDT Computed Radiography System

Portable high-resolution CR scanner for all radiography applications - weld testing, profile images
...
and aerospace. No matter what type of radiographic testing you are performing, the unique TreFoc Technology of the HD-CR 35 NDT imaging plate scanner always guarantees the highest image quality.
>

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window