where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1373 views
Technical Discussions
P. Lunal
P. Lunal
03:59 Feb-28-2003
Defects manufacturer wanted - Can you make defects ?

Hi,
we are looking for European companies that have expertise in manufacturing defects and more especially SCC types (but also more conventional types).
If you know of companies that could help us please let us know their name and possible URL.
Thank you.
PL


 
 Reply 
 
John hansen
Director, - Eddy Current Technology
ETher NDE Ltd, United Kingdom, Joined Oct 1999, 73

John hansen

Director, - Eddy Current Technology
ETher NDE Ltd,
United Kingdom,
Joined Oct 1999
73
04:17 Feb-28-2003
Re: Defects manufacturer wanted - Can you make defects ?
Try TrueFlaw from Finland I think.

www.trueflaw.com

Rgds

John Hansen
www.hocking.com



 
 Reply 
 
Joe Buckley, Sonatest PLc
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 528

Joe Buckley, Sonatest PLc

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
528
04:28 Feb-28-2003
Re: Defects manufacturer wanted - Can you make defects ?
In the UK, Sonaspection have pretty good capabilities
-Depends exactly what you need

http://www.sonaspection.co.uk

Good Luck
Joe


: Hi,
: we are looking for European companies that have expertise in manufacturing defects and more especially SCC types (but also more conventional types).
: If you know of companies that could help us please let us know their name and possible URL.
: Thank you.
: PL
.



 
 Reply 
 
J. Mark Davis
Teacher, And Consultant
University of Ultrasonics, Birmingham, Alabama, USA, Joined Mar 2000, 85

J. Mark Davis

Teacher, And Consultant
University of Ultrasonics, Birmingham, Alabama,
USA,
Joined Mar 2000
85
04:44 Feb-28-2003
Re: Defects manufacturer wanted - Can you make defects ?
PL,

My company makes IGSCC/SCC type cracks in SS materials. We have a procedure for Carbon Steel too.

For regular flaws contact Sonaspcection.

J. Mark Davis
Davis NDE, Inc.
(205) 663-7006


Hi,
: we are looking for European companies that have expertise in manufacturing defects and more especially SCC types (but also more conventional types).
: If you know of companies that could help us please let us know their name and possible URL.
: Thank you.
: PL
.




 
 Reply 
 
Phil Herman Jr.
Sales, - Manufacture of NDT Reference Standards/Test Blocks
PH Tool Reference Standards, USA, Joined Oct 1999, 79

Phil Herman Jr.

Sales, - Manufacture of NDT Reference Standards/Test Blocks
PH Tool Reference Standards,
USA,
Joined Oct 1999
79
05:39 Feb-28-2003
Re: Defects manufacturer wanted - Can you make defects ?
In addition to the two companies mentioned previously, you may try contacting FlawTech Inc. at www.flawtech.com.

Good Luck with your search.
Phil Herman Jr.
PH Tool Reference Standards

: Hi,
: we are looking for European companies that have expertise in manufacturing defects and more especially SCC types (but also more conventional types).
: If you know of companies that could help us please let us know their name and possible URL.
: Thank you.
: PL
.



 
 Reply 
 
Niklas Larsson
Niklas Larsson
08:31 Mar-03-2003
Re: Defects manufacturer wanted - Can you make defects ?
Uddcomb Engineering in Sweden is also an company that maybe can help you.
http://www.uddcomb.se/Pages/EngelskaPages/engelskaframestes/engframesetkraft.html

Regards
Niklas Larsson
SQC


: Hi,
: we are looking for European companies that have expertise in manufacturing defects and more especially SCC types (but also more conventional types).
: If you know of companies that could help us please let us know their name and possible URL.
: Thank you.
: PL
.



 
 Reply 
 
Niklas Larsson
Niklas Larsson
08:31 Mar-03-2003
Re: Defects manufacturer wanted - Can you make defects ?
Uddcomb Engineering in Sweden is also an company that maybe can help you.
http://www.uddcomb.se/Pages/EngelskaPages/engelskaframestes/engframesetkraft.html

Regards
Niklas Larsson
SQC


: Hi,
: we are looking for European companies that have expertise in manufacturing defects and more especially SCC types (but also more conventional types).
: If you know of companies that could help us please let us know their name and possible URL.
: Thank you.
: PL
.



 
 Reply 
 

Product Spotlight

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

iProbe - USB Phased Array Probe

Turn your PC, Laptop or Tablet into a powerful 32:64 Phased Array system with our USB powered Phas
...
ed Array iProbe and inspection software package. Perform affordable weld inspection and corrosion mapping inspections with this powerful but small system. The probe has a 100V pulser, 8K PRF, dual axis encoder input and achieves outstanding signal quality.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window