where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

474 views
Technical Discussions
Alexander van der Werf
Alexander van der Werf
01:43 Mar-27-2003
penetrant onderzoek van grote hoeveelheid, kleine onderdelen.

Wie heeft er een oplossing voor om op korte termijn een grote hoeveelheid, kleine onderdelen penetrant te onderzoeken?

"Can someone inform me who has a solution to test a large quantity, small parts through penetration at short notice?"


    
 
 
Ingolf Hertlin
Ingolf Hertlin
09:45 Mar-28-2003
Re: penetrant onderzoek van grote hoeveelheid, kleine onderdelen.
: Wie heeft er een oplossing voor om op korte termijn een grote hoeveelheid, kleine onderdelen penetrant te onderzoeken?
.
: "Can someone inform me who has a solution to test a large quantity, small parts through penetration at short notice?"
.
Could you specify the type of the parts in more detail and the aim of the testing? That would be helpful to suggest a method.
Rather often acoustic resonance testing (ART) which is a volume oriented methof can be used alternatively to surface oriented methods, but this depends on the parts. If applicable cost effective testing of high volumes is no problem. We have very good experience with this and are able to find even very small defects. If needed we can send you a description and application examples. Please contact me: I.Hertlin@rte.de
Best regards
Ingolf Hertlin


    
 
 
Franc Buijsen
Franc Buijsen
08:04 Apr-03-2003
Re: penetrant onderzoek van grote hoeveelheid, kleine onderdelen.
: Wie heeft er een oplossing voor om op korte termijn een grote hoeveelheid, kleine onderdelen penetrant te onderzoeken?
.
: "Can someone inform me who has a solution to test a large quantity, small parts through penetration at short notice?"
.
Wij hebben mogelijk een oplossing voor het penetrant onderzoek. Gaarne contact opnemen voor meer details:
+31 654357929

mvg

Franc Buijsen




    
 
 

Product Spotlight

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

NDTkit RT

NDTkit RT, TESTIA's Digital Radiography software The NDTkit product line software for X-ray analysi
...
s. NDTkit RT is a software benefiting from the Ultis kernel which is dedicated to radiographic image analysis. It offers a set of tools and filtering processes to assist RT operators in finding relevant flaws.
>

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

MUSE Mobile Ultrasonic Equipment

The MUSE, a portable ultrasonic imaging system, was developed for in-field inspections of light-weig
...
ht structures. The MUSE consists of a motor-driven manipulator, a water circulation system for the acoustic coupling and a portable ultrasonic flaw detector (USPC 3010). The MUSE provides images of internal defects (A-, B-,C- and D-scan).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window