where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

410 views
Technical Discussions
S S Ananthan
Consultant,
RAA Tech Solutions, India, Joined Jun 2000, 36

S S Ananthan

Consultant,
RAA Tech Solutions,
India,
Joined Jun 2000
36
03:22 Jun-05-2003
Reference radiogrpahs for titanium welds

Hello,

We are planning to take up RT of titanium tubes of 3 and 5 mm
thicknesses. We are interested in knowing whether any standard
reference radiographs are available for titanium welds
especially lower thicknesses.
Can someone suggest a suitable supplier ( preferably in India )
for titnium penetrameters both hole and wire type ?

S S Ananthan


 
 Reply 
 
Nick Welland
Nick Welland
01:35 Jun-06-2003
Re: Reference radiogrpahs for titanium welds
: Hello,
.
: We are planning to take up RT of titanium tubes of 3 and 5 mm
: thicknesses. We are interested in knowing whether any standard
: reference radiographs are available for titanium welds
: especially lower thicknesses.
: Can someone suggest a suitable supplier ( preferably in India )
: for titnium penetrameters both hole and wire type ?
.
: S S Ananthan
.
Our Ti IQI's came from the UK via our local agent in Australia. For India, try 3E Corporation in Mumbai.
I don't know of any Ti reference radiographs for welds, only castings (ASTM E1320). Maybe someone in the nuclear or aerospace industry has made some?
Regards
Nick


 
 Reply 
 

Product Spotlight

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

Research and Application Development For NDT

Acuren’s Research and Application Development specializes in the development of advanced ultraso
...
nic inspection techniques and systems for challenging inspection applications, with an emphasis on practical solutions which are field deployable. Services include manual and automated ultrasonic inspection system development, inspection technique optimization using laboratory scale studies and ultrasonic modeling (CIVA, BeamTool), preparing technical justification for technique evaluation and qualification (Probability of Detection and sizing accuracy studies), inspection/calibration/analysis procedure preparation to support field deployment of custom techniques, and development of custom imaging algorithms to support challenging inspection applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window