where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

203 views
Technical Discussions
Ivan Karunas
Ivan Karunas
01:57 Jun-26-2003
I need a help to construct RF generator.

Can anybody help me to find suitable circuit of RF ultrasonic generator. The maximum value of Vout peak-to-peak must be 400V
Frequencies 1.25, 2.5 and 5MHz.


    
 
 

Product Spotlight

Webinar: Improving Heat Exchanger Inspection Analysis

Zetec will host a webinar on automated analysis software for more effective heat exchanger inspectio
...
ns in power generation, oil & gas, pharmaceutical manufacturing & other applications. Register now. We will demonstrate how to reduce inefficiencies from legacy acquisition techniques so analysts can focus on identifying signals of interest, evaluating them & making confident decisions.
>

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window