where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

207 views
Technical Discussions
Bob Townsend
Engineering
The Boeing Co., USA, Joined Nov 1998, 1

Bob Townsend

Engineering
The Boeing Co.,
USA,
Joined Nov 1998
1
07:30 Jan-22-1999
Collision Sensors

Looking for manufacturer of good multidirectional
collision sensors. Have in-house fabed sensors(with
single 6-inch probe wires)installed on 5-axis squirter
heads. Probes are starting to fail(about fifteen years
service), need replacing. We don't want to build
again.

Would appreciate receiving any source information on
suppliers of this type of sensor.

Thanks: Bob Townsend




    
 
 

Product Spotlight

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
...
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
>

Ceram 35P (Panoramic)

The Ceram 35P is the panoramic brand new portable generators designed by Balteau NDT and is offeri
...
ng no less than 300kV, 5mA and 100% duty cycle for an incredible image contrast even at full power. It will will surely become a reference as it can be classified as a high power portable unit and can be operated with our CF2000 control unit but also with our well known Hand-X Wireless Remote Control.
>

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window
s