where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

KARL DEUTSCH
INSTRUMENTS AND SYSTEMS FOR NON-DESTRUCTIVE TESTING OF MATERIALS.

382 views
Technical Discussions
Safiye Nihan ERTURK
Safiye Nihan ERTURK
05:25 Jan-25-1999
US testing of wood

Hi,
Can anybody tell me where I can purchase US testing
equipment for in situ nondestructive evaluation of
wooden structural elements in buildings?
I'd like to know if low frequency transducers with
conical heads specially designed for use on wood,
like the type mentioned in the paper by Sandoz
(10th International Symp on NDT of Wood, Lausanne,
1996) are available in the market.
Any information on US NDT of wooden structures
and anyone interested in sharing experience on the
subject is also welcome.
Best regards,
Nihan



    
 
 
John McCanna
John McCanna
01:12 Jan-27-1999
Re: US testing of wood
: Hi,
: Can anybody tell me where I can purchase US testing
: equipment for in situ nondestructive evaluation of
: wooden structural elements in buildings?
: I'd like to know if low frequency transducers with
: conical heads specially designed for use on wood,
: like the type mentioned in the paper by Sandoz
: (10th International Symp on NDT of Wood, Lausanne,
: 1996) are available in the market.
: Any information on US NDT of wooden structures
: and anyone interested in sharing experience on the
: subject is also welcome.
: Best regards,
: Nihan

Good Evening Nihan

I contacted you earlier providing partial information.
You can contact Mr. Jeff DeWalt at CANDET, 124 Skyway Avenue,
Rexdale, Ontario, Canada M9W 4Y9 Phone: (416) 213-8000,
Fax: (416) 213-8004.

I believe they also have a web site. Try www.candet.com
or www.candet.ca

Good luck

John McCanna


    
 
 
Andrew Holuszko
Andrew Holuszko
09:59 Jan-30-1999
Re: US testing of wood
Dear Sir,
We are selling a commercial equipment which could be used for the wood testing.
The CT-3 Concrete/Material Tester; it is a handheld, battery powered tester working in about 40 kHz to 4 MHz frequency range, up to 600 V output. It displays the TOF between the probes. Unit works with the variety of custom probes including the conical head probes. The unit is manufactured by Unipan.
Please contact me for more details.
Regards,

Andrew Holuszko/Western NDE & Engineering Ltd.
Vancouver, BC, Canada





    
 
 

Product Spotlight

Echomac® Small

Available with up to eight channels of electronics to detect and evaluate thickness, flaws and eccen
...
tricity, this UT tester is housed in a convenient, smaller cabinet. This instrument can be used in conjunction with bubbler or immersion tank systems, or with a test bench or in laboratory applications. The Echomac® Small is available in the FD4, FD6 or FD6A versions.
>

NEW! The PragmaPro Instrument Platform

The PragmaPro is based on a modular cartridge technology and supports various NDT instrument modal
...
ities such as UT, PAUT, ECT and many more. This new platform is based on a machined, powder-coated aluminum frame for shock-proofness, best sealing qualities and maximum heat dissipation. This is practical to extend the outdoor temperature range and/or to extend the power injected in the transducers. The PragmaPro is aiming at a very wide range of applications, such as weld scanning, corrosion mapping and composite testing.
>

Semi-Automated Phased Array Immersion System for Small Composite Parts

Turn-key semi-automated system as an improved and affordable solution for inspection of small comp
...
osite parts. Includes support table, immersion tank, scanner, PA instrument, PC, Analysis software, database, wedge management and other options.
>

TVC awarded UKAS accreditation

TVC are delighted to finally announce we have been awarded UKAS accreditation for our calibration
...
laboratory. Laboratory accreditation to ISO/IEC 17025:2005 enables us to conduct the Electrical Verification of Ultrasonic Flaw Detection Equipment to BS EN 12668-1:2010. It has taken many months of hard work and we want to thank our staff for all their efforts during this massive undertaking.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window