where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

452 views
Technical Discussions
Jan Verkooijen
Jan Verkooijen
05:25 Jan-26-1999
Laser inspection

One of our clients has heard of a system that would be
capable of inspecting vessels from the inside within a
very short space of time. A time of 2 hours for a vessel
was quoted to detect blisters and cracks...
Does anyone have any information about such a system?


 
 Reply 
 
Bjarne Larsen
Bjarne Larsen
06:40 Feb-13-1999
Re: Laser inspection
: One of our clients has heard of a system that would be
: capable of inspecting vessels from the inside within a
: very short space of time. A time of 2 hours for a vessel
: was quoted to detect blisters and cracks...
: Does anyone have any information about such a system?

It is quite astonishing that nobody has answered Jan Verkooijens inquiry of 26 January yet. I believe that we are many who would like to know more about such a marvellous instrument.

The description is, however, almost too promissing.
Could it be that the instrument belongs to that group of examination methods, techniques and instruments which are onboard the "Flying Dutchman" and which are sold to naive natives around the world?

Kind regards

Bjarne Larsen




 
 Reply 
 
James Doyle
James Doyle
08:31 Oct-19-1999
Re: Laser inspection
: One of our clients has heard of a system that would be
: capable of inspecting vessels from the inside within a
: very short space of time. A time of 2 hours for a vessel
: was quoted to detect blisters and cracks...
: Does anyone have any information about such a system?

I am involved in the development of laser-based NDT systems. We now offer two methods - 1) laser-based profilometry and 2) laser-scanned penetrant inspection.

I don't know about this "2-hour" proposal, but I would be willing to look at the application.

Jim Doyle


 
 Reply 
 
Jan Theron
Jan Theron
05:32 May-03-2000
Re: Laser inspection
Try Custom Industrial Automation. They have a laser-based scanning service. I also heard that BEAR uses a Cyra laser scanner with their own software to assess cracks etc. from the outside of the drum.
There are some papers presented at AIChE meeting in 1995 (60th Fall Refining Meeting) on this issue. Watch Chemical Engineering Magazine (www.che.com) for a news article on this in June.

Jan Theron, Ph.D.


: : One of our clients has heard of a system that would be
: : capable of inspecting vessels from the inside within a
: : very short space of time. A time of 2 hours for a vessel
: : was quoted to detect blisters and cracks...
: : Does anyone have any information about such a system?

: It is quite astonishing that nobody has answered Jan Verkooijens inquiry of 26 January yet. I believe that we are many who would like to know more about such a marvellous instrument.

: The description is, however, almost too promissing.
: Could it be that the instrument belongs to that group of examination methods, techniques and instruments which are onboard the "Flying Dutchman" and which are sold to naive natives around the world?

: Kind regards

: Bjarne Larsen




 
 Reply 
 

Product Spotlight

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

A1525 SOLO

A1525 Solo – the most compact and affordable TMF unit with two phased array transducers and 3D v
...
isualization and analysis software in standard delivery set. A compact, ergonomic and easy to handheld Phased Array unit based on Total Focusing Method for easy-going imaging of inspection objects with two-dimensional and three-dimensional visualization and evaluation of inspection results.
>

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

VeeScan AirCraft Wheel Inspection

The VEESCAN offers maximum flexibility, has a proven mechanical design and records of breakdown-fr
...
ee operation of over 365 days. Appealing to companies in the Aerospace industry, the VEESCAN is ideal for all wheel-testing environments. With a wide selection of probes, the VeeScan allows your wheel testing facility the flexibility to select the most compatible configurations with their workload.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window