where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1026 views
Technical Discussions
M. Daehling
Engineering, NDI Administrator
Bombardier Aerospace, USA, Joined Oct 1999, 5

M. Daehling

Engineering, NDI Administrator
Bombardier Aerospace,
USA,
Joined Oct 1999
5
08:40 Sep-29-2003
Foerster Eddy current

Seeking a digital photo of a Foerster Defectoscope SD 2.832. Also would like to know if anyone provides pencil probes for this type of instrument? I can not find a probe supplier on line. Any information about adapters to other manufactures probes using BNC to microdot connections for this instrument.

Many Thanks in advance



 
 Reply 
 
Neil Burleigh
Sales
Krautkramer Australia Pty Ltd, Australia, Joined Dec 2002, 159

Neil Burleigh

Sales
Krautkramer Australia Pty Ltd,
Australia,
Joined Dec 2002
159
08:00 Sep-30-2003
Re: Foerster Eddy current
----------- Start Original Message -----------
: Seeking a digital photo of a Foerster Defectoscope SD 2.832. Also would like to know if anyone provides pencil probes for this type of instrument? I can not find a probe supplier on line. Any information about adapters to other manufactures probes using BNC to microdot connections for this instrument.
: Many Thanks in advance
------------ End Original Message ------------

Try Hocking NDT www.hocking.com the also make adapters to connect Hocking probes to other makes of EC units

Regards

Neil Burleigh



 
 Reply 
 

Product Spotlight

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Echomac® PA Bar Tester

The Echomac® PA BT provides 100% inspection of round bars for core and surface defects, at speeds u
...
p to 2 m/sec, depending on the specific application. The unit allows producers to handle a much larger range of diameters in one installation, and is available in 3 models to test 10 – 75mm diameter (small model); 20 – 130mm (medium model) or 50 – 254mm (large model) bars.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

Magnetic X-Ray Pipeline Crawler 6''-60''

Suitable to work in 6''-60''diameter with speed of up to 18m/min, Max. moving diatance 5 kilometer
...
s and provide the efficient inspection of the pipeline.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window