where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Phoenix Inspection Systems Limited
Design and manufacture ultrasonic Transducers, Scanners and Custom Solutions for NDT inspections. Innovators in NDT technology

299 views
Technical Discussions
Chris Coughlin
Chris Coughlin
04:00 Oct-03-2003
RFI: ET of carbon-carbon composites

Hi Folks,

NTIAC is reviewing the state of the art in eddy current testing of carbon-carbon composites. We are seeking all relevant knowledge about this topic, and would welcome any input. Please contact NTIAC at info@ntiac.com or (800) 684-2239.

Thanks in advance,
Chris



    
 
 
Paul Stone
Paul Stone
01:21 Nov-27-2003
Re: RFI: ET of carbon-carbon composites
I am studying at the University of Derby for my Beng in Mechanical Manufacture. The subject of my final year dissertation is depth measurement of silicone carbide fibbers in titanium metal matrix composites using eddy currents. Do you know of any one or any where that is measuring the depth of fibres in TiMMC using eddy currents?

----------- Start Original Message -----------
: Hi Folks,
: NTIAC is reviewing the state of the art in eddy current testing of carbon-carbon composites. We are seeking all relevant knowledge about this topic, and would welcome any input. Please contact NTIAC at info@ntiac.com or (800) 684-2239.
: Thanks in advance,
: Chris
------------ End Original Message ------------




    
 
 

Product Spotlight

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window