where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

GB Inspection Systems Ltd.
A leading UK manufacturer of Ultrasonic Probes, Accessories, Supplier of NDT Equipment and more.
1018 views
Technical Discussions
XU Bingzhang
XU Bingzhang
05:04 Feb-05-1999
ask for a PC Board pulser for NDT of concrete

We are interested in NDT of concrete, especialy reinforced concrete, so
we are in the same area. We need your help in instrument.
The high power pulser and high quality ultrasonic probe are needed.
Last time we visited a www page on , HILL -scan 3100 PC card pulser, you
can find it on http://www.ndt.net/article/ecndt98/ut/483/483.htm,
I ask the company ,but no reply!.Would you please find a products like
this ?




 
 Reply 
 
Wieslaw Bicz
Wieslaw Bicz
02:01 Feb-05-1999
Re: ask for a PC Board pulser for NDT of concrete
: We are interested in NDT of concrete, especialy reinforced concrete, so
: we are in the same area. We need your help in instrument.
: The high power pulser and high quality ultrasonic probe are needed.
: Last time we visited a www page on , HILL -scan 3100 PC card pulser, you
: can find it on http://www.ndt.net/article/ecndt98/ut/483/483.htm,
: I ask the company ,but no reply!.Would you please find a products like
: this ?

We are making such a card, you can find the information about it on our page.



 
 Reply 
 
Ed Antolino
Ed Antolino
05:07 Feb-05-1999
High Power Tone Burst

Matec Instruments offers 3 different instrument configuations with toneburst pulsers to do low frequency testing.
1) (2) Stand alone instruments the Explorer II with TFT display and Windows based software control or a pulser reciever with no display PR 5000. each has 1000 volts, < 2500watts output.

2)Tone burst PC card TB 1000. 300 volts 450 watts
output.

Contact Matec at 508-393-0155 0r fax 508-393-5476




 
 Reply 
 
Rolf Diederichs
Director,
NDT.net, Germany, Joined Nov 1998, 608

Rolf Diederichs

Director,
NDT.net,
Germany,
Joined Nov 1998
608
09:54 Feb-10-1999
Re: ask for a PC Board pulser for NDT of concrete
: We are interested in NDT of concrete, especialy reinforced concrete, so
: we are in the same area. We need your help in instrument.
: The high power pulser and high quality ultrasonic probe are needed.
: Last time we visited a www page on , HILL -scan 3100 PC card pulser, you
: can find it on http://www.ndt.net/article/ecndt98/ut/483/483.htm,
: I ask the company ,but no reply!.Would you please find a products like
: this ?
----------------------------------

I am aware about that emails often don't get the adequate attention.
Companies have an email box but have not ready the
concept how to track email communications. It's even worse if
the company needs to filter valuable messages from a lot of carbage.
One of these valuable message between the carbage of hundreds of emails
may be difficult to take care about.
I use Eudora Pro 4.1 (http://www.eudora.com) which offers comprehensive
sorting and filter tools.

In this particular case I suggest to send a FAX, its number
is mentioned together with the email address.

Hillger also participate in the NDTnet Exhibition.
But you may watch the 'Countries Served' line, which is in Hillger's
case mentioned as 'Europe' only. Anyway try it, since
exhibitor's are often in delay with updating this information.

For the future I wish me a FAX and Callback Button on all Exhibitor's pages.
I will contact Dr. Hillger, his company is settled not far from me.

Rolf Diederichs




 
 Reply 
 

Product Spotlight

Ultrasonic tomograph for imaging of concrete structures А1040 MIRA

Applicable for concrete inspection allowing imaging of the internal structure of objects from conc
...
rete, reinforced concrete, different stones. The operation applies pulse-echo technique at one-side access to the object. The instrument is feasible for concrete inspection for searching conduct ducts, conduits, detection of foreign inclusions, holes, honeycombing, cracks and other concrete defects.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

Echomac® Small

Available with up to eight channels of electronics to detect and evaluate thickness, flaws and eccen
...
tricity, this UT tester is housed in a convenient, smaller cabinet. This instrument can be used in conjunction with bubbler or immersion tank systems, or with a test bench or in laboratory applications. The Echomac® Small is available in the FD4, FD6 or FD6A versions.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window