where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

429 views
Technical Discussions
Massimiliano Pau
Teacher, -
Univ. of Cagliari, Dept. of Mechanical Engineering, Italy, Joined Sep 2002, 25

Massimiliano Pau

Teacher, -
Univ. of Cagliari, Dept. of Mechanical Engineering,
Italy,
Joined Sep 2002
25
01:39 Mar-18-2004
USD 15 and RS232

Dear colleagues

I'm planning to acquire data from a Krautkramer USD15 detector via Serial Interface.

The manual says that, for example, the full A-scan is downloadable using the code DA, but in the function table are also reported the codes E1, E2, E3, and E4 as related to "1st value in the measurement line" (E1) etc.

My question is: are these values related with the amplitude of the RF signal displayed in that moment? Unfortunately the manual doesn't describe these functions (i.e. "buy the UltraDOC software")


Best regards

Massimiliano



 
 Reply 
 

Product Spotlight

GUL Subsea Solutions - Screeening & Monitoring

To inspect new and existing subsea lines, you need proven technology and experience. GUL offers it's
...
technology to solve this challenge: GUL Subsea and gMAT Transducer Rings.
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window