where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

505 views
Technical Discussions
Jacky
Engineering
Taiwan, Province of China, Joined Aug 2002, 5

Jacky

Engineering
Taiwan, Province of China,
Joined Aug 2002
5
06:54 Mar-29-2004
What is the Montecario method???

Dear everybody,
Could anybody tell me the textbooks or reference books about the Montecario simulation method using in NDE evaluation??? THKS


 
 Reply 
 
J. Dolfi
Director
ford, USA, Joined Oct 1999, 8

J. Dolfi

Director
ford,
USA,
Joined Oct 1999
8
01:55 Mar-29-2004
Re: What is the Montecario method???
----------- Start Original Message -----------
: Dear everybody,
: Could anybody tell me the textbooks or reference books about the Montecario simulation method using in NDE evaluation??? THKS
------------ End Original Message ------------


The Monte Carlo method is used to simulate a chance of obtaining an outcome consisting of probabilities and number of items and trials.

You can easily setup a simulator using excel and see the outcome of say rolling 4 dice and getting 4 6's or any other combination of numbers from one to six.

I use it for demonstration. It is good for showing binomial distrubution outcome.



 
 Reply 
 

Product Spotlight

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

Extended Range Variable Wall® Piping Calibration Blocks for Longseam Inspection

This set of two blocks has been specially designed for situations where ultrasonic examination tak
...
es place circumferentially or “around the curve” for applications such as inspection of longseam welds in piping and vessels. Jointly designed by PH Tool and Holloway NDT, the blocks feature side-drilled hole reflectors positioned within novel compound-curves, each with multiple thickness steps. The unique design results in a light and compact form factor, with the largest block weighing just over 15 lbs and spanning just 16 ¾”. Coverage is provided for nominal pipe sizes from 6” to 10” in the small block and 12” to a whopping 56” in the large block. The compound OD curves and multiple wall thicknesses actually exceed ASME requirements, providing exceptional signal response and measurement accuracy. Properly managing beam divergence off the ID and stabilizing beam skew due to probe rocking is essential to maintaining a consistent calibration when inspecting lengthwise on curved surfaces.
>

Wireless TOFD scanner

Quick, accurate and highly reproducible welds testing. The System operates wirelessly and is compat
...
ible with any type of Windows based Laptop, Desktop or Tablet.
>

Research and Application Development For NDT

Acuren’s Research and Application Development specializes in the development of advanced ultraso
...
nic inspection techniques and systems for challenging inspection applications, with an emphasis on practical solutions which are field deployable. Services include manual and automated ultrasonic inspection system development, inspection technique optimization using laboratory scale studies and ultrasonic modeling (CIVA, BeamTool), preparing technical justification for technique evaluation and qualification (Probability of Detection and sizing accuracy studies), inspection/calibration/analysis procedure preparation to support field deployment of custom techniques, and development of custom imaging algorithms to support challenging inspection applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window