where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

540 views
Technical Discussions
Construction Materials Institute
Construction Materials Institute
01:59 Apr-09-2004
Half Cell.

Dear friends,

We are looking for a report which includes the guide how to intepret the results of half-cell potential (ASTM C876).

Would you please kindly guide us in this regard.

Best regards,

CMI
University of Tehran



 
 Reply 
 
Thomas
Thomas
06:23 Oct-01-2004
Re: Half Cell.
This web site may be helpful, I found it while also researching ASTM C876. http://www.modot.org/services/rdt/reports/Ri00027/RDT03003.pdf "Half-Cell Potential Test" Section page 9
Good Luck,

----------- Start Original Message -----------
: Dear friends,
: We are looking for a report which includes the guide how to intepret the results of half-cell potential (ASTM C876).
: Would you please kindly guide us in this regard.
: Best regards,
: CMI
: University of Tehran
------------ End Original Message ------------




 
 Reply 
 
Joel A. Light
Consultant, Corrosion Prevention
Deepwater Corrosion Services Inc., USA, Joined Jul 2002, 12

Joel A. Light

Consultant, Corrosion Prevention
Deepwater Corrosion Services Inc.,
USA,
Joined Jul 2002
12
06:02 Oct-04-2004
Re: Half Cell.
Try www.nace.org
It's the official website of the National Association of Corrosion Engineers.
It's also important to know what type of half cell you are using.
Have a look at the web site, if it does not help, please feel free to contact me directly.

----------- Start Original Message -----------
: This web site may be helpful, I found it while also researching ASTM C876. http://www.modot.org/services/rdt/reports/Ri00027/RDT03003.pdf "Half-Cell Potential Test" Section page 9
: Good Luck,
: : Dear friends,
: : We are looking for a report which includes the guide how to intepret the results of half-cell potential (ASTM C876).
: : Would you please kindly guide us in this regard.
: : Best regards,
: : CMI
: : University of Tehran
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

MANTIS

MANTIS is a compact, powerful and affordable flaw detector (16:64PR), dedicated to field operators
...
. This portable equipment offers standard (electronic-, sector-, compound scan, conventional UT for pulse-echo, dual array and TOFD inspections), and advanced phased-array (real-time TFM -Total Focusing Method). MANTIS benefits from the same intuitive and user-friendly interface (CAPTURE) than Gekko for easier inspections.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window