where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

402 views
Technical Discussions
Brian Hanni
Black & Veach, USA, Joined May 2001, 2

Brian Hanni

Black & Veach,
USA,
Joined May 2001
2
02:50 Apr-27-2004
Pipe corrosion profiling with x-ray

We are considering the purchase of a digital X-ray system to perform corrosion profiling of in-service piping systems and code weld inspections of pipe. I would appreciate any feedback on these systems.


Thank you.

Brian Hanni


    
 
 Reply 
 
Massimo Carminati
Massimo Carminati
07:23 May-04-2004
Re: Pipe corrosion profiling with x-ray
Our company has about 15.000 measurement experience on pipe corrosion profiling. Feel free to contact us directly.

----------- Start Original Message -----------
: We are considering the purchase of a digital X-ray system to perform corrosion profiling of in-service piping systems and code weld inspections of pipe. I would appreciate any feedback on these systems.
:
: Thank you.
: Brian Hanni
------------ End Original Message ------------




    
 
 Reply 
 

Product Spotlight

MUSE Mobile Ultrasonic Equipment

The MUSE, a portable ultrasonic imaging system, was developed for in-field inspections of light-weig
...
ht structures. The MUSE consists of a motor-driven manipulator, a water circulation system for the acoustic coupling and a portable ultrasonic flaw detector (USPC 3010). The MUSE provides images of internal defects (A-, B-,C- and D-scan).
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

PROlineTOP Plug & Play Ultrasonic inspection device

As Plug & Play solution it units all control and operation elements in a small housing and therefo
...
re replaces the typical control cabinet...
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window