where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
346 views
Technical Discussions
Rolf Diederichs
Director,
NDT.net, Germany, Joined Nov 1998, 616

Rolf Diederichs

Director,
NDT.net,
Germany,
Joined Nov 1998
616
09:24 Feb-26-1999
This Month's Introduction - New Forum Features


Discussion Forums are a great advantage of the Internet. NDTnet maximizes opportunities for users to meet and expand their networks of professional contacts. With that in mind, we've added a new "profile" icon in the forum in an attempt to compensate for the lack of face to face contact in cyberspace.

Another change you'll notice is that we no longer have a Panel of Experts. We express our gratitude to all Panel of Experts participants who have served during the last 3 years. That does not mean that we have no experts anymore, they will still stay with this forum as participants and hopefully continue their excellent contributions. Along with their future messages a special 'Author Profile' icon will be shown; that icon will appear for all NDTnet authors registered to this forum. One reason that led to this change was that many excellent answers are been posted by all participants of this forum - most of the forum participants are experts!

We hope that all of you will make use of each profile page and update your own profile by filling out the online feedback form or sending a message to forum@ndt.net - Thank You!

Enjoy!

Rolf Diederichs

This is the first message with the new profile features and hopefully will work error-free)


 
 Reply 
 

Product Spotlight

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

PAUT Probes

Typical Phased Array probes have frequencies between 1MHz and 20MHz and the number of wafers is 10
...
to 128. M2 Electronics offers customers conventionally ultrasound probes and the ability to provide high-precision Phased Array Ultrasound Probes of up to 256 wafers. We can also customize the probe for our customers to meet the specific application requirements of the user.
>

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window