where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

375 views
Technical Discussions
Ali Abrar
Ali Abrar
04:28 Jun-17-2004
Urea Titanium Stripper Eddy Current

We are interested in carrying out EC of Urea Titanium Stripper for 2800 tubes. Any one with info on sources for such quality services?


    
 
 
Brian Shannon
Brian Shannon
07:02 Jun-17-2004
Re: Urea Titanium Stripper Eddy Current
----------- Start Original Message -----------
: We are interested in carrying out EC of Urea Titanium Stripper for 2800 tubes. Any one with info on sources for such quality services?
------------ End Original Message ------------
Sir: Please contact me at the referenced address. IESCO specializes in the inspection and assessment of plant equipment in Ammonia and Urea facilities. Best regards.




    
 
 
andrey
andrey
05:47 Jul-12-2004
Re: Urea Titanium Stripper Eddy Current
----------- Start Original Message -----------
: : We are interested in carrying out EC of Urea Titanium Stripper for 2800 tubes. Any one with info on sources for such quality services?
: Sir: Please contact me at the referenced address. IESCO specializes in the inspection and assessment of plant equipment in Ammonia and Urea facilities. Best regards.
------------ End Original Message ------------
We are experiensed to refurbishment of titanium stripper. Please contact us. Prometey,Russia, see

www.ureline.h11.ru




    
 
 

Product Spotlight

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window