The Largest Open Access Portal of Nondestructive Testing (NDT)

309 views Technical Discussions sandeep pawar sandeep pawar 03:33 Aug-09-2004 REGARDING THE TIME OF FLIGHT DIFFRACTION TECHNIQUE hello friends.........thank u very much for your response to my request for the TOFD information....i am very grateful to all of you.......... this is for some of you who didn't notice my posted message...i am doing a seminar on TOFD METHOD OF NDT.if anyone of you who is working on TOFD or has worked on TOFD or if u have information on TOFD which u think might help me...plz plz plz send it to me or contact me at.....sandeepapawar@hotmail.com............. hope to stay in touch with you... thanx sandeep, india    Reply  Translate  Close

Product Spotlight Scatter Correction for Industrial Cone-Beam Computed Tomography (CBCT) StandVarex Imaging Download our white paper on Scatter Correction for Industrial Cone-Beam Computed Tomography (CBCT) ... Using 3D VSHARP, a fast GPU-Based Linear Boltzmann Transport Equation Solver here: http://bit.ly/2Y0t78P > 4 Showcases3 Videos ISONIC 3510 StandSonotron NDT Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an ... d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections > 5 Showcases5 Videos Conformable wedge transducer StandIMASONIC SAS The conformability is obtained with a flexible membrane filled with water between the transducer and ... the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation. > UCI Hardness Tester NOVOTEST T-U2 StandNOVOTEST Ltd UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and ... alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale. > 5 Showcases5 Videos more Showcases

Share...

• Home
• Exhibition
• Archive
• Forum
• Jobs
• Members
• Events
• Directory
• NDT A-Z

• Advertise
• Privacy Policy
• Contact & Imprint
• About

© NDT.net - Where expertise comes together. The Largest Open Access Portal of Nondestructive Testing (NDT)- since 1996