where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

261 views
Technical Discussions
kishor pherwani
kishor pherwani
06:42 Aug-16-2004
magnetic particle inspection

we are considering purchasing NDT equipment suitable to locate inclusion, flaws, cracks, surface defects of Alloy Steel Bright Bars SAE 1541 or eqvt. 25mm dia x 6m lengths. The bars are hot rolled and then peeled and ground. Inspection is to be done after P & G. Productivity reqd is 100 bars per 8 hours shift. Could you pls advise the equipment that we should purchase.


    
 
 
Simon Amallraja
Simon Amallraja
09:25 Aug-18-2004
Re: magnetic particle inspection
----------- Start Original Message -----------
: we are considering purchasing NDT equipment suitable to locate inclusion, flaws, cracks, surface defects of Alloy Steel Bright Bars SAE 1541 or eqvt. 25mm dia x 6m lengths. The bars are hot rolled and then peeled and ground. Inspection is to be done after P & G. Productivity reqd is 100 bars per 8 hours shift. Could you pls advise the equipment that we should purchase.
------------ End Original Message ------------

we represent Electro Mag field Controls in India. If you can contact us with your complete specfications, applications, we will be able to help you.

If you are looking for inclusions & flaws, it better you go in for Immersion UT with Pulser Receiver with automation can meet all your above testing reqts.

For both the above -
You can contact me @ 098480 43309 or
Mahindra Intertrade Ltd,
Mahindra House, 1-7-1, Parklane, TSR Complex, Secunderabad -500003.
Ph: 040 2781 8928.
Fax: 040 2781 9604.

or our Mumbai Office:
Mahindra Intertrade Ltd,
Mahindra Towers, Worli Road No: 13, Worli,
Mumbai - 400 018.
Mr. Mohan Raghavan - Head NDT Divn.
Ph: 022 - 2497 5580 ( Direct)

Regards.

D.Simon Amallraja.


    
 
 

Product Spotlight

Wireless TOFD scanner

Quick, accurate and highly reproducible welds testing. The System operates wirelessly and is compat
...
ible with any type of Windows based Laptop, Desktop or Tablet.
>

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

High-end Ultrasonic Flaw Detector with 32:128PR PAUT and 2-ch TOFD: SyncScan 2

SIUI’s newly launched SyncScan 2, is a high-end ultrasonic flaw detector with 32:128PR PAUT and
...
2-ch TOFD, which can maximize your efficiency for PA and TOFD. ● Support PA/TOFD/UT ● 32-ch PA is more suitable for inspection on extra-thick wall and high-attenuation material. ● 32-ch PA and 2-ch TOFD work simultaneously. ● Support PR mode for corrosion inspection.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window