where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

499 views
Technical Discussions
S.G.
Consultant
Enrico Enterprises, India, Joined Jul 2004, 20

S.G.

Consultant
Enrico Enterprises,
India,
Joined Jul 2004
20
09:50 Aug-30-2004
Ultrasonic inspection of small diameter ERW tubes.

Hi,

I want to know Is it possible to test full body of ERW pipes ( Diameter 10 mm to 50 ) by ultrasonic automated system ?





 
 Reply 
 
Fred Beck
Fred Beck
04:04 Aug-31-2004
Re: Ultrasonic inspection of small diameter ERW tubes.
----------- Start Original Message -----------
: Hi,
: I want to know Is it possible to test full body of ERW pipes ( Diameter 10 mm to 50 ) by ultrasonic automated system ?
:
:
------------ End Original Message ------------
Full body Ultrasonic inspection of ERW tubing is possible as long as the tube weld is scarffed on both the OD and ID. TACTIC makes systems to inspect cut lengths of tubing (ERW or seamless). Our web address is shown below.

Regards,
Tac Technical Instrument Corp.
Frederick Beck, President




 
 Reply 
 

Product Spotlight

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

Ultrasonic Probe Recharacterization Service

NDT Systems offers a comprehensive Aftercare and Recharacterization Service for all our ultrasonic
...
probes. The Recharacterization Service is fully compliant with International ASTM E1065 Standard Guide (and other applicable standards) and offers complete documentation, traceable to the ASTM E1065 Standard. For more details or to schedule Recharacterization Services contact ndtsales@ndtsystems.com
>

SITEX CPSERIES

Teledyne ICM’s CPSERIES has been designed with a view to revolutionizing the handling and perfor
...
mances of portable X-Ray sets. Despite having managed to halve the weight of similar portable X-Ray generators available on the market (while continuing to provide the same power output), the SITEX CPSERIES generators feature a shutter, a laser pointer, a beryllium window, an aluminum filter and two integrated diaphragms (customized sizes are available upon request). Without compromising the robustness and reliability for which ICM products are renowned, the small size and light weight of the SITEX CPSERIES will radically change the way that you perform your RT inspections. And you will see a positive impact in terms of both quality and return on investment (ROI).
>

On Demand Webinar: Using Eddy Current Array for Large Areas in Place of Magnetic Particle and Liquid Penetrant Testing

New on-demand webinar on the use of eddy current array (ECA) technology in lieu of liquid penetrant
...
testing (PT) and magnetic particle testing (MT) for large area screenings. The webinar includes an introduction to the technologies with advantages and disadvantages of each. Side by side examples are discussed including aircraft stringers, engine blades, forgings, weld plates & more. View it today.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window