where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

AT-Automation Technology GmbH
AT -Automation Technology is a systems house for industrial image processing. AT offers thermographic ndt systems as well as high-speed 3D sensors.

1326 views
Technical Discussions
Tamara Vugrin
R & D
German Aerospace Center, Germany, Joined Sep 2004, 1

Tamara Vugrin

R & D
German Aerospace Center,
Germany,
Joined Sep 2004
1
00:01 Sep-01-2004
UT standard ETTC 7

Hi,

I am looking for information about the ultrasonic inspection standard ETTC 7. Can anybody tell me what this standard demands or in which book I can find it?

Thanks a lot.

Tamara


    
 
 
Udo Schlengermann
Consultant, -
Standards Consulting, Germany, Joined Nov 1998, 174

Udo Schlengermann

Consultant, -
Standards Consulting,
Germany,
Joined Nov 1998
174
06:17 Sep-01-2004
Re: UT standard ETTC 7
reply and question,
Hello,
Are you shure, ETTC7 is a standard on ultrasonic testing (who is the editor)?
ETTC7 looks like Electromagnetic Testing Technical Committee 7;
e.g. the ASTM Committee for Electromagnetic Testing
is numbered ASTM E07.07.

Kind regards
Udo Schlengermann

Applications Laboratory
GE Inspection Technologies Systems GmbH
Tel. +49-2233-601-550
Fax +49-2233-601-402
e-mail udo.schlengermann@ae.ge.com

----------- Start Original Message -----------
: Hi,
: I am looking for information about the ultrasonic inspection standard ETTC 7. Can anybody tell me what this standard demands or in which book I can find it?
: Thanks a lot.
: Tamara
------------ End Original Message ------------




    
 
 

Product Spotlight

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Navic - Steerable Modular Automated Scanner

The Navic is a modular, motorized, steerable scanner designed to carry multiple attachments used
...
in various scanning and inspection applications. The Navic is capable of weld scanning (girth welds and long seam welds), automated corrosion mapping, and tank scanning.
>

Mentor UT – Ultrasonic Phased Array Flaw Detector

With Mentor UT, you get an accessible and efficient inspection experience. Create user-defined menus
...
and workflows (“apps”) with GE’s desktop software Mentor Create to ensure consistency, even for the most complex inspections, every time. Mentor UT is the first UT device to easily allow wireless connectivity and live streaming, so you get second opinions when you need them most—in real-time.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window
s