where expertise comes together - since 1996

Web's Largest Portal of Nondestructive Testing (NDT)
Open Access Database (Conference Proceedings, Articles, News), Exhibition, Forum, Network

All Forum Boards
Technical Discussions >
LFET - Low Frequency Electromagnetic technique
Career Discussions
Job Offers
Job Seeks
Classified Ads
About NDT.net
Articles & News

LECOEUR ELECTRONIQUE
The Specialist of electronics for ultrasonic testing.

264 views
06:23 Sep-16-2004
Robert Anderson
LFET - Low Frequency Electromagnetic technique

I would like to talk with someone who has experience with LFET used to inspect large diameter carbon steel pipe ( 20 - 30" ). The purpose of the inspection is to identify corrossion/errosion of the pipe wall. The pipe is used to transport a brine solution high in salts and other corrosive elements. The pipeline operates at 450 degrees F, 300psi. LFET is being used as the second stage of a three stage inspection program.




 
00:57 Jun-30-2005
Panatest
Re: LFET - Low Frequency Electromagnetic technique


----------- Start Original Message -----------
: I would like to talk with someone who has experience with LFET used to inspect large diameter carbon steel pipe ( 20 - 30" ). The purpose of the inspection is to identify corrossion/errosion of the pipe wall. The pipe is used to transport a brine solution high in salts and other corrosive elements. The pipeline operates at 450 degrees F, 300psi. LFET is being used as the second stage of a three stage inspection program.
------------ End Original Message ------------




 


© NDT.net - The Web's Largest Portal of Nondestructive Testing (NDT) ISSN 1435-4934

Open Access Database, |Conference Proceedings| |Articles| |News| |Exhibition| |Forum| |Professional Network|