where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1248 views
Technical Discussions
Amry Amin
R & D
Malaysian Inst. for Nuclear Technology Research, Malaysia, Joined Aug 2002, 4

Amry Amin

R & D
Malaysian Inst. for Nuclear Technology Research,
Malaysia,
Joined Aug 2002
4
09:14 Sep-30-2004
Utrasonic probe assessment

Hi everybody,

Besides than ASTM E1065, does anyone knows of standards or procedures of assessing UT probes. Can anyone help.


 
 Reply 
 
Udo Schlengermann
Consultant, -
Standards Consulting, Germany, Joined Nov 1998, 183

Udo Schlengermann

Consultant, -
Standards Consulting,
Germany,
Joined Nov 1998
183
02:42 Sep-30-2004
Re: Utrasonic probe assessment
Hello,

please take a look at
European Standard EN 12668-2
Nondestructive Testing - Characterization and verification of ultrasonic examination equipment - Part 2: Probes

Kind reards



 
 Reply 
 
M.Margolin
M.Margolin
06:23 Apr-20-2006
Testing a temporal resolution
----------- Start Original Message -----------
Which generator to use in EN 12668 # 8.4.7?
What are the waveforms for these measurements?

Regards,

M.Margolin


 
 Reply 
 
Khairul
Khairul
10:34 Jun-28-2011
Re: Utrasonic probe assessment
In Reply to Udo Schlengermann at 02:42 Sep-30-2004 .

Hello all,Any idea where i can sent my UT probe for calibration service as per EN 12668-1 requirement

 
 Reply 
 
Udo Schlengermann
Consultant, -
Standards Consulting, Germany, Joined Nov 1998, 183

Udo Schlengermann

Consultant, -
Standards Consulting,
Germany,
Joined Nov 1998
183
10:47 Jun-30-2011
Re: Utrasonic probe assessment
In Reply to Khairul at 10:34 Jun-28-2011 .

Dear colleagues,
there must be a misunderstanding:

Ultrasonic probes are covered by EN 12668-2 (not by part 1 which is for ultrasonic isntruments only).

Periodical checks are only required for instruments (part 1), not for probes (part 2).

Best regards

Udo Schlengermann

 
 Reply 
 

Product Spotlight

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

PAUT Probes

Typical Phased Array probes have frequencies between 1MHz and 20MHz and the number of wafers is 10
...
to 128. M2 Electronics offers customers conventionally ultrasound probes and the ability to provide high-precision Phased Array Ultrasound Probes of up to 256 wafers. We can also customize the probe for our customers to meet the specific application requirements of the user.
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window