Would like any information on inspecting nickel 200 tubes in a heat exchanger. Would rft, magnetic saturation be used? If rft is used, would the probe driver have to be smaller than a rft boiler probe to prevent over saturation of the tube? Any info in regards to this would be greatly appreciated Thanks Terry
The FlexoFORM™ solution integrates flexible phased array probe
a scanner to solv
e the challenges that come with inspecting pipe
When combined with a water column, this solution can be used to
easy-to-interpret data on elbows with diameters ranging from 4.5
in. OD up
to flat and offers many benefits.
Available to order from stock in a range of 5MHz – 7.5MHz and from
16 to 64 elements. Designed w
ith piezo-composite elements, Phoenix
phased array probes provide high-resolution imaging to maximise
sensitivity; accurate ultrasonic detection and sizing of defects
in welds; and effective corrosion mapping. Housed in a rugged
stainless steel case for on-site industrial NDT applications.