where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
451 views
Technical Discussions
Dipl.-Ing. Martin Heinz
Dipl.-Ing. Martin Heinz
09:04 Oct-11-2004
Dry coupling of ultrasonic transducers to steel

What materials are suitable for building up dry coupling cushions? Silicon and PU-elastomers has a very low acoustic impedances even if they are filled by e.g. tungsten powder (maximum about 3 MRayl) . So the acoustic loss is large. Are there other materials which could provide acoustic impedances of op to 10 MRayls and more?
What acoustic impedances does couplants as sonogel have?


 
 Reply 
 
ali fardi
ali fardi
08:50 Nov-12-2005
Re: Dry coupling of ultrasonic transducers to steel
----------- Start Original Message -----------
: What materials are suitable for building up dry coup Silicon and PU-elastomers has a very low acoustic impedances even if they are filled by e.g. tungsten powder (maximum about 3 MRayl) . So the acoustic loss is large. Are there other materials which could provide acoustic impedances of op to 10 MRayls and more?
: What acoustic impedances does couplants as sonogel have?
------------ End Original Message ------------





 
 Reply 
 

Product Spotlight

Panther

M2M PANTHER is a phased-array equipment designed for both desktop and industrial applications, offer
...
ing unparalleled performance in a compact unit. It combines the speed required for industrial integrated Phased-Array Ultrasound (PAUT) solutions, with the most complete set of total focusing method (TFM) imaging techniques, making it the ultimate tool for R&D and procedure qualification.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Semi-Automated Phased Array Immersion System for Small Composite Parts

Turn-key semi-automated system as an improved and affordable solution for inspection of small comp
...
osite parts. Includes support table, immersion tank, scanner, PA instrument, PC, Analysis software, database, wedge management and other options.
>

Aerospace Systems - Automated Ultrasonic Inspection

USL are specialists in the design and manufacture of turnkey ultrasonic inspection systems for aer
...
ospace applications. From monolithic composites to complex honeycomb structures. This video shows just a few examples of what is possible, find out more at: www.ultrasonic-sciences.co.uk
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window