where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

TecScan Systems
We offer a complete line of NDT scanners, Immersion Tanks & Gantry systems which incorporate Ultrasonic, Phased Array & Eddy Current technologies.

617 views
Technical Discussions
Stephen Spear
Stephen Spear
09:36 Apr-20-1999
Sensitivity comparison information Fluorescent water washable penetrant

Can anyone tell me where I can find an article, case study, lab test, etc. regarding sensitivity comparison using fluorescent water washable penetrant with/without developer?


    
 
 
Michael E Daehling
Engineering, NDI Administrator
Bombardier Aerospace, USA, Joined Oct 1999, 5

Michael E Daehling

Engineering, NDI Administrator
Bombardier Aerospace,
USA,
Joined Oct 1999
5
04:22 Apr-21-1999
Re: Sensitivity comparison information Fluorescent water washable penetrant
: Can anyone tell me where I can find an article, case study, lab test, etc. regarding sensitivity comparison using fluorescent water washable penetrant with/without developer?

I know I got an article on this subject from Sherwin Inc. I'll follow up with you. In the mean time you might give them a call.


    
 
 
Michael Daehling
Engineering, NDI Administrator
Bombardier Aerospace, USA, Joined Oct 1999, 5

Michael Daehling

Engineering, NDI Administrator
Bombardier Aerospace,
USA,
Joined Oct 1999
5
09:57 Apr-26-1999
Re: Sensitivity comparison information Fluorescent water washable penetrant
: Can anyone tell me where I can find an article, case study, lab test, etc. regarding sensitivity comparison using fluorescent water washable penetrant with/without developer?

Stephen, I found the article on penetrant performance with and without developer. It was writen by Dennis Smith and presented at the ASNT spring conference 96. This paper was available from Sherwin Inc. and it may be available from ASNT.



    
 
 
Norman Thomsen
Norman Thomsen
09:33 Apr-27-1999
Re: Sensitivity comparison information Fluorescent water washable penetrant
: Can anyone tell me where I can find an article, case study, lab test, etc. regarding sensitivity comparison using fluorescent water washable penetrant with/without developer?

Stephen, see the CSNDT Journal, March/April 1999 page 15.





    
 
 

Product Spotlight

X-ray CT aids research into defect formation in AM parts

X-ray CT is used to research how additive manufacturing process parameters influence defect format
...
ion in AM parts.
>

NDTkit RT

NDTkit RT, TESTIA's Digital Radiography software The NDTkit product line software for X-ray analysi
...
s. NDTkit RT is a software benefiting from the Ultis kernel which is dedicated to radiographic image analysis. It offers a set of tools and filtering processes to assist RT operators in finding relevant flaws.
>

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window